emacs/mps/design/trace.txt

.. mode: -*- rst -*-

Tracer
======

:Tag: design.mps.trace
:Author: David Jones
:Date: 1996-09-25
:Status: incomplete design
:Revision: $Id$
:Copyright: See `Copyright and License`_.
:Index terms:   pair: tracer; design


Introduction
------------

.. warning::

    This document is currently a mixture of very old design notes (the
    preformatted section immediately following) and some newer stuff.
    It doesn't yet form anything like a complete picture.


Architecture
------------

_`.instance.limit`: There is a limit on the number of traces that can
be created at any one time. This limits the number of concurrent
traces. This limitation is expressed in the symbol ``TraceLIMIT``.

.. note::

    ``TraceLIMIT`` is currently set to 1 as the MPS assumes in various
    places that only a single trace is active at a time. See
    request.mps.160020_ "Multiple traces would not work". David Jones,
    1998-06-15.

.. _request.mps.160020: https://info.ravenbrook.com/project/mps/import/2001-11-05/mmprevol/request/mps/160020

_`.rate`: See `mail.nickb.1997-07-31.14-37 </project/mps/mail/1997/07/31/14-37/0.txt>`_.

.. note::

    Now revised? See request.epcore.160062_ and
    change.epcore.minnow.160062. David Jones, 1998-06-15.

.. _request.epcore.160062: https://info.ravenbrook.com/project/mps/import/2001-11-05/mmprevol/request/epcore/160062

_`.exact.legal`: Exact references must either point outside the arena
(to non-managed address space) or to a tract allocated to a pool.
Exact references that are to addresses which the arena has reserved
but hasn't allocated memory to are illegal (such a reference cannot
possibly refer to a real object, and so cannot be exact). We check
that this is the case in ``TraceFix()``.

.. note::

    Depending on the future semantics of ``PoolDestroy()`` we might
    need to adjust our strategy here. See `mail.dsm.1996-02-14.18-18`_
    for a strategy of coping gracefully with ``PoolDestroy()``.

.. _mail.dsm.1996-02-14.18-18: https://info.ravenbrook.com/project/mps/mail/1996/02/14/18-18/0.txt

_`.fix.fixed.all`: ``ss->fixedSummary`` is accumulated (in
``TraceFix()``) for all pointers, whether or not they are genuine
references. We could accumulate fewer pointers here; if a pointer
fails the ``TractOfAddr()`` test then we know it isn't a reference, so
we needn't accumulate it into the fixed summary. The design allows
this, but it breaks a useful post-condition on scanning (if the
accumulation of ``ss->fixedSummary`` was moved the accuracy of
``ss->fixedSummary`` would vary according to the "width" of the white
summary). See `mail.pekka.1998-02-04.16-48`_ for improvement suggestions.

.. _mail.pekka.1998-02-04.16-48: https://info.ravenbrook.com/project/mps/mail/1998/02/04/16-48/0.txt


Analysis
--------

_`.fix.copy-fail`: Fixing can always succeed, even if copying the
referenced object has failed (due to lack of memory, for example), by
backing off to treating a reference as ambiguous. Assuming that fixing
an ambiguous reference doesn't allocate memory (which is no longer
true for AMC for example). See request.dylan.170560_ for a slightly
more sophisticated way to proceed when you can no longer allocate
memory for copying.

.. _request.dylan.170560: https://info.ravenbrook.com/project/mps/import/2001-11-05/mmprevol/request/dylan/170560


Ideas
-----

_`.flip.after`: To avoid excessive barrier impact on the mutator
immediately after flip, we could scan during flip other objects which
are "near" the roots, or otherwise known to be likely to be accessed
in the near future.


Implementation
--------------

Speed
.....

_`.fix`: The function implementing the fix operation should be called
``TraceFix()`` and this name is pervasive in the MPS and its documents
to describe this function. Nonethless, optimisation and strict
aliasing rules have meant that we need to use the external name for
it, ``_mps_fix2()``.

_`.fix.speed`: The fix path is critical to garbage collection speed.
Abstractly, the fix operation is applied to all references in the
non-white heap and all references in the copied heap. Remembered sets
cut down the number of segments we have to scan. The zone test cuts
down the number of references we call fix on. The speed of the
remainder of the fix path is still critical to system performance.
Various modifications to and aspects of the system are concerned with
maintaining the speed along this path. See
`design.mps.critical_path`_.

.. _design.mps.critical_path: critical_path

_`.fix.tractofaddr`: A reference that passes the zone test is then
looked up to find the tract it points to, an operation equivalent to
calling ``TractOfAddr()``.

_`.fix.tractofaddr.inline`: ``TraceFix()`` doesn't actually call
``TractOfAddr()``. Instead, it expands this operation inline (calling
``ChunkOfAddr()``, then ``INDEX_OF_ADDR()``, checking the appropriate
bit in the chunk's ``allocTable``, and finally looking up the tract in
the chunk's page table). The reason for inlining this code is that we
need to know whether the reference points to a chunk (and not just
whether it points to a tract) in order to check the `.exact.legal`_
condition.

_`.fix.whiteseg`: The reason for looking up the tract is to determine
whether the segment is white. There is no need to examine the segment
to perform this test, since whiteness information is duplicated in
tracts, specifically to optimize this test.

.. note::

    Nonetheless, it is likely to be more efficient to maintain a
    separate lookup table from address to white segment, rather than
    indirecting through the chunk and the tract. See job003796_.

.. _job003796: http://www.ravenbrook.com/project/mps/issue/job003796/

_`.fix.noaver`: ``AVER()`` statements in the code add bulk to the code
(reducing I-cache efficacy) and add branches to the path (polluting
the branch pedictors) resulting in a slow down. Replacing the
``AVER()`` statements with ``AVER_CRITICAL()`` on the critical path
improves the overall speed of the Dylan compiler by as much as 9%. See
`design.mps.critical_path`_.

_`.fix.nocopy`: ``AMCFix()`` used to copy objects by using the format's
copy method. This involved a function call (through an indirection)
and in ``dylan_copy`` a call to ``dylan_skip`` (to recompute the
length) and call to ``memcpy`` with general parameters. Replacing this
with a direct call to ``memcpy`` removes these overheads and the call
to ``memcpy`` now has aligned parameters. The call to ``memcpy`` is
inlined by the C compiler. This change results in a 4–5% speed-up in
the Dylan compiler.

_`.reclaim`: Because the reclaim phase of the trace (implemented by
``TraceReclaim()``) examines every segment it is fairly time
intensive. Richard Tucker's profiles presented in
request.dylan.170551_ show a gap between the two varieties variety.hi
and variety.wi.

.. _request.dylan.170551: https://info.ravenbrook.com/project/mps/import/2001-11-05/mmprevol/request/dylan/170551

_`.reclaim.noaver`: Accordingly, reclaim methods use
``AVER_CRITICAL()`` instead of ``AVER()``.


Life cycle of a trace object
----------------------------

``TraceCreate()`` creates a trace in state ``TraceINIT``

Some segments get condemned (made white).

``TraceStart()`` gets called which:

- Derives an initial reference partition based on the existing
  white set.  The white zone set and the segments' summaries are used to
  create an initial grey set.

- Emits a ``GCStart()`` message.

- Initialises ``trace->rate`` by estimating the required scanning
  rate.

- Moves the trace into the state ``TraceUNFLIPPED``.

- Immediately calls ``traceFlip`` which flips the trace and moves
  it into state ``TraceFLIPPED``.

Whilst a trace is alive every so often its ``traceQuantum`` method
gets invoked (via ``TracePoll()``) in order to do a quantum of tracing
work. ``traceQuantum`` is responsible for ticking through the trace's
top-level state machine. Most of the interesting work, the tracing,
happens in the ``TraceFLIPPED`` state.

The trace transitions through its states in the following sequence:
``TraceINIT`` → (``TraceUNFLIPPED``) → ``TraceFLIPPED`` →
``TraceRECLAIM`` → ``TraceFINISHED``.

Whilst ``TraceUNFLIPPED`` appears in the code, no trace does any work
in this state; all traces are immediately flipped to be in the
``TraceFLIPPED`` state (see above).

Once the trace is in the ``TraceFINISHED`` state it performs no more
work and it can be safely destroyed. Generally the callers of
``traceQuantum`` will destroy the trace.


Making progress: scanning grey segments
.......................................

Most of the interesting work of a trace, the actual tracing, happens
in the ``TraceFLIPPED`` state (work *would* happen in the
``TraceUNFLIPPED`` state, but that is not implemented).

The tracer makes progress by choosing a grey segment to scan, and
scanning it. The actual scanning is performed by pools.

Note that at all times a reference partition is maintained.

The order in which the trace scans things determines the semantics of
certain types of references (in particular, weak and final
references). Or, to put it another way the desired semantics of weak
and final references impose certain restrictions on the order in which
the trace can scan things.

The tracer uses a system of *reference ranks* (or just ranks) so that
it can impose an order on its scanning work. The ranks are ordered.

The tracer proceeds band by band. The first band is all objects it can
reach by following references of the first rank. The second band is
all subsequent objects it can reach by following references of the
second and first ranks. The third band is all subsequent objects it
can reach by following references of the third, second, and first
ranks. And so on. The description of the tracer working like this
originated in [RHSK_2007-06-25]_.

A trace keep track of which band it is tracing. This is returned by
the ``TraceBand()`` method. Keeping this band information helps it
implement the semantics of finalization and weakness. The band used to
not be explicitly stored, but this hindered the implementation of good
finalization semantics (essentially in some circumstances finalization
messages were delayed by at least one collection cycle, see
job001658_.

.. _job001658: https://info.ravenbrook.com/project/mps/issue/job001658/

The band is used when selecting a grey segment to scan (the selection
occurs in ``traceFindGrey()``). The tracer attempts to first find
segments whose rank is the current band, then segments whose rank is
previous to the current band, and so on. If there are no segments
found then the current band is exhausted and the current band is
incremented to the next rank. When the current band is moved through
all the ranks in this fashion there is no more tracing to be done.



References
----------

.. [RHSK_2007-06-25]
   "The semantics of rank-based tracing";
   Richard Kistruck; Ravenbrook Limited; 2007-06-25;
   <https://info.ravenbrook.com/mail/2007/06/25/11-35-57/0/>.


Document History
----------------

- 1996-09-25 David Jones. Incomplete design.

- 2002-06-07 RB_ Converted from MMInfo database design document.

- 2007-07-02 David Jones. Added notes on tracer progress.

- 2013-05-22 GDR_ Converted to reStructuredText.

.. _RB: http://www.ravenbrook.com/consultants/rb/
.. _GDR: http://www.ravenbrook.com/consultants/gdr/


Copyright and License
---------------------

Copyright © 2013-2014 Ravenbrook Limited. All rights reserved.
<http://www.ravenbrook.com/>. This is an open source license. Contact
Ravenbrook for commercial licensing options.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:

#. Redistributions of source code must retain the above copyright
   notice, this list of conditions and the following disclaimer.

#. Redistributions in binary form must reproduce the above copyright
   notice, this list of conditions and the following disclaimer in the
   documentation and/or other materials provided with the distribution.

#. Redistributions in any form must be accompanied by information on how
   to obtain complete source code for this software and any
   accompanying software that uses this software.  The source code must
   either be included in the distribution or be available for no more than
   the cost of distribution plus a nominal fee, and must be freely
   redistributable under reasonable conditions.  For an executable file,
   complete source code means the source code for all modules it contains.
   It does not include source code for modules or files that typically
   accompany the major components of the operating system on which the
   executable file runs.

**This software is provided by the copyright holders and contributors
"as is" and any express or implied warranties, including, but not
limited to, the implied warranties of merchantability, fitness for a
particular purpose, or non-infringement, are disclaimed.  In no event
shall the copyright holders and contributors be liable for any direct,
indirect, incidental, special, exemplary, or consequential damages
(including, but not limited to, procurement of substitute goods or
services; loss of use, data, or profits; or business interruption)
however caused and on any theory of liability, whether in contract,
strict liability, or tort (including negligence or otherwise) arising in
any way out of the use of this software, even if advised of the
possibility of such damage.**