This (along with a suggestion to the OP to set
open-paren-in-column-0-is-defun-start to nil) fixes bug #37910. It may also
have fixed bug #5490 and bug #18072.
* lisp/progmodes/cc-engine.el (c-state-cache-non-literal-place): Remove thi
non-sensical function, replacing it with ....
(c-state-cache-lower-good-pos): New function.
(c-renarrow-state-cache, c-append-lower-brace-pair-to-state-cache)
(c-remove-stale-state-cache, c-remove-stale-state-cache-backwards): Instead of
altering the state-cache list structure with setcar and setcdr, use setq and
consing.
(c-parse-state-1): Call c-state-cache-lower-good-pos rather than
c-state-cache-non-literal-place.
This fixes bug #18134.
* lisp/progmodes/cc-engine.el (c-crosses-statement-barrier-p): Give a limit
to the c-backward-syntactic-ws which is searching for a virtual semicolon. In
the main loop, Use c-forward-syntactic-ws to skip blocks of comments.
Also make miscellaneous amendments.
* lisp/progmodes/cc-align.el, lisp/progmodes/cc-cmds.el
* lisp/progmodes/cc-defs.el, lisp/progmodes/cc-engine.el
* lisp/progmodes/cc-langs.el, lisp/progmodes/cc-vars.el: Remove lots of
unneeded backslashes.
* lisp/progmodes/cc-langs.el (c-string-innards-re-alist): Remove redundant
"\\|\r" from regular expression.
* lisp/progmodes/cc-mode.el (c-make-mode-syntax-table): Correct the name of
the hook normal-erase-is-backspace-MODE-hook from a non-existant hook name.
* lisp/progmodes/cc-engine.el (c-before-change-check-<>-operators): Perform
checking now on an insertion, should point be inside a critical token.
(c-forward-<>-arglist-recur, c-guess-continued-construct): Check for <::, etc.
* lisp/progmodes/cc-langs.el (c-<-pseudo-digraph-cont-regexp)
(c-<-pseudo-digraph-cont-len): New lang variables/constants.
The problem was bar in the following being spuriously recognised as a
function, and foo as a type, as though the & were a *: Foo foo (&bar);.
* lisp/progmodes/cc-engine.el (c-forward-decl-or-cast-1): New variable
got-function-name-prefix, which is set when an operator like * (but not &)
precedes the putative identifer in parentheses. Test this variable when
deciding whether or not to "move the type backwards" to the previous
identifier.
* lisp/progmodes/cc-langs.el (c-type-decl-operator-prefix-key): New lang const
and var.
* lisp/progmodes/cc-engine.el (c-beginning-of-statement-1): Check for
operators which cannot start a statement, which may follow a closing brace.
Don't recognise an end of statement in such a case.
* lisp/progmodes/cc-langs.el (c-operator-re, c-bin-tern-operators)
(c-unary-operators, c-non-after-{}-operators, c-non-after-{}-ops-re): New lang
consts and vars.
* lisp/progmodes/cc-engine.el (c-invalidate-macro-cache): Add in a cond arm
to handle the change position being less than the recorded CPP contruct end.
This fixes bug #24671.
* lisp/progmodes/cc-langs.el (c-multichar->-op-not->>-regexp): remove,
transforming into ...
(c-multichar->-op-not->>->>>-regexp) New lang const/var.
* lisp/progmodes/cc-engine.el (c-forward-<>-arglist-recur): use the new
c-multichar->-op-not->>->>>-regexp in place of the old
c-multichar->-op-not->>-regexp.
This saves repeated calculations at run time.
* lisp/progmodes/cc-langs.el (c-stmt-boundary-skip-chars)
(c-stmt-boundary-skip-list, c-stmt-boundary-skip-chars-with-comma)
(c-stmt-boundary-skip-list-with-comma): New lang constants/variables.
* lisp/progmodes/cc-engine.el (c-commas-bound-stmts): New variable
(c-beginning-of-statement-1): Set c-commas-bound-stmts rather than
c-stmt-delim-chars.
(c-crosses-statement-barrier-p): Remove the now unneeded calculations of
c-stmt-delim-chars. Set skip chars to one of the new lang variables, and
later to a substring of it.
(c-at-statement-start-p): Set c-syntactic-skip-backward from the new
variables.
(c-at-expression-start-p): Bind c-commas-bound-stmts. Use
c-stmt-delim-chars-with-comma rather than c-stmt-delim-chars in a backward
scan.
(c-guess-basic-syntax): Bind c-commas-bound-stmts rather than
c-stmt-delim-chars to itself. Bind c-commas-bound-stmts to t at another place
rather than setting c-stmt-delim-chars to c-stmt-delim-chars-with-comma.
* lisp/progmodes/cc-engine.el (c-full-lit-near-cache): Amend the definition
such that an element's END element will be nil if the pertinent literal is
open at EOB.
(c-full-pp-to-literal): Before setting the aforementioned END element, check
that we're no longer in a literal. (c-literal-limits): When
c-full-pp-to-literal returns a list with a nil END element, replace this by
(point-max) to keep the interface of c-literal-limits unchanged.
* lisp/progmodes/cc-mode.el (c-after-change-mark-abnormal-strings): Having
found a string quote, check it is not inside an unterminated comment (i.e. one
at EOB).
* lisp/progmodes/cc-engine.el (c-looking-at-c++-attribute)
(c-enclosing-c++-attribute, c-slow-enclosing-c++-attribute): New macro and
functions.
(c-crosses-statement-barrier-p): Add [ into skip-chars for C++ Mode, and use
it to detect and skip over an attribute whilst scanning forward.
(c-sws-lit-type): Use the new value 'attribute.
(c-invalidate-sws-region-before): Put a save-match-data around this function.
Detect and handle an enclosing attribute at either END or BEG.
(c-invalidate-sws-region-after): Handle C++ attributes.
(c-forward-sws, c-backward-sws): Handle C++ attributes.
* lisp/progmodes/cc-mode.el (c-fl-decl-end): Detect and handle point being
inside a C++ attribute.
For this introduce the text property c-fl-syn-tab to "mirror" syntax-table.
* lisp/progmodes/cc-defs.el (c-is-escaped, c-will-be-escaped, c-put-syn-tab)
(c-clear-syn-tab, c-clear-syn-tab-properties, c-with-extended-string-fences):
new macros.
(c-point): Use c-is-escaped
(c-search-forward-char-property, c-search-backward-char-property)
(c-search-forward-char-property-with-value-on-char)
(c-search-forward-char-property-without-value-on-char): Fix regexp error
involving \n.
* lisp/progmodes/cc-engine.el (c-semi-pp-to-literal): User
c-with-extended-string-fences around a parse-partial-sexp.
(c-full-get-near-cache-entry): Fix an off-by-one error.
(c-full-pp-to-literal): Avoid writing duplicate entries into a cache.
(c-after-change-unmark-raw-strings): Use c-clear-syn-tab-properties.
* lisp/progmodes/cc-mode.el (c-leave-cc-mode-mode): Clear the c-fl-syn-tab
properties, too.
(c-basic-common-init): Mark c-fl-syn-tab as a non-sticky text property.
(c-depropertize-new-text): Also handle c-fl-syn-tab.
(c-multiline-string-check-final-quote, c-parse-quotes-after-change): Use
c-is-escaped.
(c-fl-syn-tab-region): New variable.
(c-clear-string-fences, c-restore-string-fences, c-remove-string-fences): New
functions.
(c-before-change-check-unbalanced-strings)
(c-after-change-mark-abnormal-strings, c-after-change-escape-NL-in-string):
Use the new functions and macros.
(c-before-change, c-after-change, c-font-lock-fontify-region): Restore the
syntax-table text properties from c-fl-syn-tab text properties for these
functions.
(c-electric-pair-inhibit-predicate): Test the c-fl-syn-tab property rather
than syntax-table.
Also fix two faulty regexps, save-match-data, and check c-major-mode-is
'c++-mode where needed.
* lis/progmodes/cc-langs.el (c-last-c-comment-end-on-line-re)
(c-last-open-c-comment-start-on-line-re): Handle repeated *s in regexp
correctly.
* lisp/progmodes/cc-engine.el (c-beginning-of-macro, c-end-of-macro): Protect
the match-data with save-match-data around regexp operations.
(c-end-of-macro): In the loop handling multiline block comments, check a
comment actually is multiline.
* lisp/progmodes/cc-mode.el (c-depropertize-CPP): Only call
c-depropertize-raw-strings-in-region in C++ Mode.
* lisp/progmodes/cc-defs.el (c-font-lock-flush): Delete this macro.
* lisp/progmodes/cc-engine.el (c-propertize-raw-string-opener): Delete the
call to the macro.
* lisp/progmodes/cc-engine.el (c-back-over-member-initializers): call
c-parse-state outside of the narrowing operation.
* lisp/progmodes/cc-fonts.el (c-get-fontification-context)
(c-font-lock-cut-off-declarators): Replace calls to c-determine-limit with
crude position calculations for speed.
* lisp/progmodes/cc-defs.el: (c-syntax-table-hwm): Move the defvar to here
from cc-mode.el, since the variable is needed at compile time in
c-emacs-features.
(c-min-property-position): New macro.
(c-put-char-property, c-clear-char-property, c-clear-char-properties)
(c-clear-char-property-with-value-function)
(c-clear-char-property-with-value-on-char-function)
(c-put-char-properties-on-char): Adjust c-syntax-table-hwm appropriately when
syntax-table text properties are changed.
* lisp/progmodes/cc-engine.el (c-truncate-lit-pos-cache): Remove the now
unneeded setting of c-syntax-table-hwm, and the unneeded declaration of
c-syntax-table-hwm.
* lisp/progmodes/cc-engine.el (c-end-of-macro): Check for being in a
degenerate zero length "macro", when setting the macro cache.
(c-determine-+ve-limit): Add in a missing goto-char form for when start-pos is
non-nil.
(c-back-over-member-initializers): Add a search limit parameter.
* lisp/progmodes/cc-fonts.el (c-get-fontification-context): Add a search limit
to c-go-up-list-backward.
(c-font-lock-cut-off-declarators): Add a search limit to
c-back-over-member-initializers.
* lisp/progmodes/cc-mode.el (c-before-change-check-unbalanced-strings): Don't
set c-new-END to the end of logical line (which might be a long macro).
(c-after-change-mark-abnormal-strings): Calculate end-hwm in place of the
setting of c-new-END (above). Use this as a search limit rather than
c-new-END.
Move two declarations to a more suitable point in the cc-engine.el.
* lisp/progmodes/cc-engine.el (c-after-change-unmark-raw-strings): Change an
re-search-forward to search-forward.
(c-semi-lit-near-cache, c-semi-near-cache-limit): Move the declarations.
* lisp/progmodes/cc-engine.el (c-truncate-lit-pos-cache): Maintain the new
variable c-syntax-table-hwm after buffer changes.
* lisp/progmodes/cc-mode.el (c-syntax-table-hwm): New variable.
(c-before-change): Set c-syntax-table-hwm to "infinity".
(c-after-change): Call syntax-ppss-flush-cache, just before a font locking is
due to take place.
(Final Commit)
* lisp/progmodes/cc-engine.el (c-semi-trim-near-cache): Correct a comparison
with the wrong ...-limit variable.
(c-semi-pp-to-literal): Remove a wrong setting of c-lit-pos-cache-limit.
(c-full-get-near-cache-entry): Eliminate extravagant and unneeded coding.
(c-state-cache-init, c-record-parse-state-state): No longer manipulate
c-lit-pos-cache, which is no longer regarded as part of c-parse-state.
* lisp/progmodes/cc-mode.el (c-basic-common-init): Call
c-truncate-lit-pos-cache to initialize the literal cache.
(Intermediate commit)
* lisp/progmodes/cc-engine.el, lisp/progmodes/cc-fonts.el
* lisp/progmodes/cc-mode.el : Rename:
c-state-semi-nonlit-pos-cache -> c-lit-pos-cache,
c-state-semi-nonlit-pos-cache-limit -> c-lit-pos-cache-limit,
c-state-semi-nonlit-near-cache -> c-semi-lit-near-cache,
c-truncate-semi-nonlit-pos-cache -> c-truncate-lit-pos-cache,
c-state-semi-trim-near-cache -> c-semi-trim-near-cache,
c-state-semi-get-near-cache-entry -> c-semi-get-near-cache-entry,
c-state-semi-put-near-cache-entry -> c-semi-put-near-cache-entry,
c-state-semi-pp-to-literal -> c-semi-pp-to-literal,
c-state-full-pp-to-literal -> c-full-pp-to-literal,
c-state-semi-trim-cache -> c-trim-lit-pos-cache.
* lisp/progmodes/cc-engine.el (c-semi-near-cache-limit): New variable.
(c-truncate-lit-pos-cache): This now truncates the cache variables for all
three lit- sub-caches.
(c-semi-put-near-cache-entry): Increase c-semi-near-cache-limit to the
position of the new entry.
(c-full-near-cache-limit, c-full-lit-near-cache): New variables.
(c-full-trim-near-cache, c-full-get-near-cache-entry)
(c-full-put-near-cache-entry): New functions.
(c-full-pp-to-literal): Amend to use the new functions, and to optimize the
use of the available caches, similarly to c-semi-pp-to-literal.
* lisp/progmoes/cc-langs.el (c-block-comment-awkward-chars): New lang
constant and variable.
* lisp/progmodes/cc-engine.el (c-state-semi-nonlit-pos-cache): Enhance the
doc comment.
(c-state-semi-get-near-cache-entry, c-state-semi-pp-to-literal): Reuse entry
if the sought position is in a literal, and lies between the literal start and
the entry's position.
(c-cache-to-parse-ps-state, c-parse-ps-state-below): Amend such that instead
of cacheing a state for a position after a backslash or first character of a
2-character comment delimiter, this is done for the previous character
position.
Acknowledge that when the function is called, it is always at the start of a
string, never in the middle or at the end of one.
* lisp/progmodes/cc-engine.el (c-maybe-re-mark-raw-string): Reformulate the
cond form into a `when' form, with all but the first arm of the cond
discarded.
In the bug scenario, the second and subsequent noise macros with parentheses
were getting font-lock-type-face.
* lisp/progmodes/cc-engine.el (c-end-of-token)
(c-forward-noise-clause-not-macro-decl): New functions.
(c-find-decl-prefix-search): Handle noise macros by skipping over them.
(c-forward-decl-or-cast-1): In the loop checking for types, skip over all
consecutive noise macros with parens, not just one.
* lisp/progmodes/cc-engine.el (c-beginning-of-statement-1): Enhance the
analysis of case labels to handle parenthesised expressions (e.g. macros).
* lisp/progmodes/cc-langs.el (c-nonlabel-nonparen-token-key): New lang const
and lang var.
This is mainly by enhancing a parse-partial-sexp cache to retain recently
calculated values. Also, there are several miscellaneous optimizations and
bug fixes.
* lisp/progmodes/cc-engine.el (c-state-semi-nonlit-near-cache): New buffer
local variable.
(c-state-semi-trim-near-cache, c-state-semi-get-near-cache-entry)
(c-state-semi-put-near-cache-entry, c-state-semi-trim-cache): New functions.
(c-state-semi-pp-to-literal, c-state-full-pp-to-literal): Use the new "near"
cache.
(c-parse-ps-state-below): Use the new function c-state-semi-trim-cache.
(c-before-change-check-<>-operators): Check simply for < or > in the
neighbourhood before doing more expensive processing.
(c-maybe-re-mark-raw-string): Give a backward search limit to an operation
which was needlessly lacking one.
* lisp/progmodes/cc-mode.el (c-doc-fl-decl-start, c-doc-fl-decl-end): Check a
certain regexp is valid before performing the (somewhat expensive) actions of
these functions.
(c-fl-decl-start): In the search for a C++ lambda capture list, replace (slow)
calculation of c-parse-state by a (less slow) c-go-up-list-backward.
* lisp/progmodes/cc-engine.el (c-beginning-of-statement-1): The variable
before-sws-pos should record the position of a closing paren/brace/bracket
before moving backwards over a sexp. When there is a syntactic WS macro
between the starting point and the closing p/b/b, setq before-sws-pos again
after moving backward over the macro.
* lisp/progmodes/cc-engine.el (c-find-decl-prefix-search): Handle the new
matching possibility (of a #define construct) in the new
c-decl-prefix-or-start-re.
(c-find-decl-spots): Allow the initial search for an in-macro starting point
settle on the # of #define, to facilitate the regexp matching in
c-find-decl-prefix-search.
* lisp/progmodes/cc-langs.el (c-anchored-hash-define-no-parens): New lang
const.
(c-literal-start-regexp): Correct what was always supposed to be a "generic
string" regexp element.
(c-decl-prefix-or-start-re): Enhance also to match "#define <identifier>".
(c-dposr-cpp-macro-depth): New lang variable and lang constant.
In particulr, handle multiline block comments whose newlines are not escaped.
There is an example of this in #define EXTRA_CONTEXT_FIELDS in editfns.c.
* lisp/progmodes/cc-engine.el (c-beginning-of-macro, c-end-of-macro): Enclose
the loops scanning escaped newlines with outer loops which check
heuristically for, respectively, a block comment ender and a block comment
starter on the lines we end up on. (A rigorous syntactic check would be too
slow, here.)
* lisp/progmodes/cc-langs.el (c-last-c-comment-end-on-line-re)
(c-last-open-c-comment-start-on-line-re): New language constants/variables.
(c-restricted-<>-arglists, c-parse-and-markup-<>-arglists):
Move declaration before first use.
(c-after-change-unmark-raw-strings): Remove unused var `found-end`.
* lisp/progmodes/cc-engine.el (c-update-brace-stack): bind
c-parse-and-markup-<>-arglists and c-restricted-<>-arglists to t around the
call to c-forward-<>-arglist, to force the marking of template delimiters with
syntax-table text properties.
E.g., on typing the closing delimiter of a string continued onto a second
line, the opening delimiter retained its font-lock-warning-face.
* lisp/progmodes/cc-defs.el (c-c++-raw-string-opener-re)
(c-c++-raw-string-opener-1-re): New constants.
(c-sub-at-c++-raw-string-opener, c-at-c++-raw-string-opener): New macros.
* lisp/progmodes/cc-engine.el (c-raw-string-pos)
(c-depropertize-raw-strings-in-region, c-after-change-unmark-raw-strings):
Replace uses of open-coded raw string regexps by the new constants and macros
in cc-defs.el.
* lisp/progmodes/cc-fonts.el (c-font-lock-raw-strings): Ditto
* lisp/progmodes/cc-mode.el (c-before-change-check-unbalanced-strings): Set
c-new-BEG to the beginning of the string when we encounter its closing ".
When not in a raw string, but in a string, clear syntax-table properties from
its delimiters and set c-new-BEG/END to its limits.
(c-after-change-mark-abnormal-strings): When applying syntax-table properties
to string delimiters, also set c-new-BEG/END to ensure subsequent
fontification.
These are where changing the identifier in a raw string delimiter causes
different delimiters to match eachother.
* lisp/progmodes/cc-engine.el (c-raw-string-end-delim-disrupted): New
variable.
(c-before-change-check-raw-strings): Use new variable.
(c-after-change-unmark-raw-strings): When typing into an opening delimiter or
altering its close delimiter causes the opening delimiter to match a later
closing delimiter, clear all syntax-table char properties from the opening
delimiter onwards, and set c-new-END to point max. Also, when changing a
closing delimiter, check whether its new value matches a previously open
opening delimiter earlier in the buffer, and amend the syntax-table text
properties appropriately.
* lisp/progmodes/cc-engine.el (c-forward-sws, c-backward-sws): Recognize
matches of c-doc-line-join-re as syntactic whitespace.
(c-find-decl-prefix-search): Recognize and move over matches of
c-doc-line-join-re as whitespace.
(c-find-decl-spots): Before moving backward a char, check (bobp). Before
moving forward over a comment, check it isn't possibly a "bright" comment.
* lisp/progmodes/cc-fonts.el (c-get-doc-comment-style): New function,
extracted from c-compose-keywords-list.
(c-compose-keywords-list): Call the above new function.
(pike-font-lock-keywords, pike-font-lock-keywords-2)
(pike-font-lock-keywords-3): Call c-set-doc-comment-res.
(c-doc-line-join-re, c-doc-bright-comment-start-re, c-doc-line-join-end-ch):
New variables.
(c-set-doc-comment-re-element, c-set-doc-comment-char-list): New macros.
(c-set-doc-comment-res): New function.
(c-font-lock-doc-comments): For consistency and repeatability, in a sequence
of C++ style doc comments, don't fontify the region between BOL and the
comment marker.
(autodoc-line-join-re, autodoc-bright-comment-start-re)
(autodoc-line-join-end-ch): New variables.
* lisp/progmodes/cc-mode.el (c-doc-fl-decl-start, c-doc-fl-decl-end): New
functions.
(c-change-expand-fl-region, c-context-expand-fl-region): Call the above two
new functions for extra possibilities for the start and end of a construct.
* doc/misc/cc-mode.texi (Doc Comments): Add a sentence drawing attention to
the possibility of fontifying constructs within a doc comment.
* lisp/progmodes/cc-langs.el (c-class-id-suffix-ws-ids-kwds)
(c-class-id-suffix-ws-ids-key): New lang const/var.
* lisp/progmodes/cc-engine.el (c-guess-basic-syntax CASE 5D.4): Check for and
skip over any matches for c-class-id-suffix-ws-ids-key (i.e. "final") before
":".
Also firm up detection of beginning of brace list in
c-looking-at-or-maybe-in-bracelist.
* lisp/progmodes/cc-engine.el (c-looking-at-or-maybe-in-bracelist): On
detection of such a ref-qualifier, set braceassignp to nil. When this
variable has a nil value, return nil as the value of the function. On
encountering a } when scanning backwards, recognise this as the end of a
previous construct and stop the scan.
Integrate the handling of raw string and ordinary string fontification.
* lisp/progmodes/cc-defs.el (c-font-lock-flush)
(c-search-forward-char-property-without-value-on-char): new macros.
(c-point): In the 'eoll arm, check for eobp.
(c-search-forward-char-property-with-value-on-char): Handle the &optional
limit argument being nil.
(c-clear-char-property-with-value-on-char-function)
(c-clear-char-property-with-value-on-char): Return the position of the first
cleared property.
* lisp/progmodes/cc-engine.el (c-find-decl-prefix-search): Don't spuriously
recognize the change of face at a ) as the start of a string (a
"pseudo match").
(c-old-beg-rs c-old-end-rs): New variables.
(c-raw-string-pos): Analyze raw string delimiters more carefully.
(c-raw-string-in-end-delim): New function.
(c-depropertize-raw-string): Largely rewritten.
(c-before-change-check-raw-strings): New functionality: only remove the
syntax-table text properties from raw strings whose delimiters are about to
change.
(c-propertize-raw-string-id): New function.
(c-after-change-re-mark-raw-strings): Remove, incorporating functionality into
other functions.
(c-propertize-raw-string-opener): Largely rewritten.
(c-after-change-re-mark-raw-strings): Removed.
(c-after-change-unmark-raw-strings, c-after-change-unmark-raw-strings): New
functions.
* lisp/progmodes/cc-fonts.el (c-font-lock-raw-strings): Largely rewritten.
* lisp/progmodes/cc-langs.el (c-before-font-lock-functions): Replace
c-after-change-re-mark-unbalanced-strings by
c-after-change-mark-abnormal-strings in the t, c+objc, c++ and java sections.
Add c-after-change-unmark-raw-strings and remove
c-after-change-re-mark-raw-strings from the c++ section.
* lisp/progmodes/cc-mode.el (c-old-BEG c-old-END): Remove.
(c-old-END-literality): New variable.
(c-depropertize-CPP): Remove syntax-table properties from raw strings within
macros.
(c-before-change-check-unbalanced-strings): Call
c-truncate-semi-nonlit-pos-cache to preserve the integrity of the cache.
(c-before-change-check-unbalanced-strings): Call
c-truncate-semi-nonlit-pos-cache, largely rewritten.
(c-after-change-re-mark-unbalanced-strings): Renamed to
c-after-change-mark-abnormal-strings. Call c-maybe-re-mark-raw-string.
Deal with lone backslashes that have no effect in string literals,
but indicate that something is amiss.
* lisp/auth-source-pass.el (auth-source-pass-entries):
* lisp/textmodes/artist.el (artist-figlet-get-font-list-windows):
* lisp/org/ob-abc.el (org-babel-expand-body:abc, org-babel-execute:abc):
* lisp/org/ob-forth.el (org-babel-forth-session-execute):
* lisp/vc/vc-git.el (vc-git--program-version):
Add backslash in regexp for correctness.
* lisp/gnus/nnmail.el (nnmail-split-abbrev-alist):
Replace `\||' with `\\|' to follow the obvious regexp intent.
* lisp/org/org-list.el (org-plain-list-ordered-item-terminator):
Add backslash in doc comment so that it appears as intended.
* lisp/progmodes/cc-engine.el (c-forward-decl-or-cast-1, c-end-of-decl-1):
* lisp/progmodes/f90.el (f90-font-lock-keywords-2):
* lisp/progmodes/etags.el (etags-tags-completion-table):
* lisp/progmodes/ruby-mode.el (ruby-syntax-propertize):
* test/lisp/emacs-lisp/cl-print-tests.el (cl-print-tests-1):
Remove superfluous backslashes from regexp.
* test/lisp/emacs-lisp/rx-tests.el (rx-char-any):
Remove superfluous backslash from doc comment.
while preserving the indentation of nested C++ uniform initialization.
* lisp/progmodes/cc-align.el (c-lineup-2nd-brace-entry-in-arglist)
(c-lineup-class-decl-init-+, c-lineup-class-decl-init-after-brace): New
indentation functions.
* lisp/progmodes/cc-engine.el (c-forward-class-decl): New function.
(c-do-declarators): New function, partially extracted from
c-font-lock-declarators, which now calls the new function.
(c-inside-bracelist-p): Amend the introductory comment.
(c-add-stmt-syntax): Add code to prevent the spurious recognition of a
'defun-block-intro when a brace pair is used as an initializer.
(c-evaluate-offset): No longer ignore vectors of length >= 2.
(c-calc-offset): Refactor clumsily nested `if'/`or' into a cond form.
* lisp/progmodes/cc-fonts.el (c-font-lock-declarators): Replace the bulk of
this function by a call to the new c-forward-class-decl.
* lisp/progmodes/cc-langs.el (c-type-decl-prefix-key): Recognize "~" as a
type decl operator.
* lisp/progmodes/cc-mode.el (c-fl-decl-start): While searching backward for a
"}" at an EOD, deal with actually finding the end of a brace list.
* doc/misc/cc-mode.texi (List Line-Up): document
c-lineup-2nd-brace-entry-in-arglist, c-lineup-class-decl-init-+, and
c-lineup-class-decl-init-after-brace.
* lisp/progmodes/cc-styles.el (c-style-alist): In styles "gnu", "bsd",
"stroustrup", "python", and "java", change the offset for brace-list-intro
from the default value or c-lineup-arglist-intro-after-paren to a list
beginning with the symbol first, followed by two of the new alignment
functions, followed by +.
* lisp/progmodes/cc-vars.el (c-offset-alist): Change the default value of
brace-list-entry from c-lineup-under-anchor back to 0.
Fix handling of CC Mode's syntactic WS cache. Make noise-macro option
variables buffer local.
* lisp/progmodes/cc-engine.el (c-put-is-sws, c-put-in-sws, c-remove-is-sws)
(c-remove-in-sws c-remove-is-and-in-sws): Add edebug specs.
(c-invalidate-sws-region-before): Add a `beg' parameter. Handle noise
macros like other literals.
(c-invalidate-sws-region-after-del): Move the adjustment of (cdr
c-sws-lit-limits) due to buffer change to c-invalidate-sws-region-after.
(c-invalidate-sws-region-after-ins): Move (goto-char end) to the correct
place.
(c-invalidate-sws-region-after): Adjust (cdr c-sws-lit-limits) due to buffer
change. Handle noise macros.
(c-backward-sws): Set simple-ws-beg appropriately when the start point is in
the middle of a noise macro.
(c-forward-decl-or-cast-1): Recognize a function identifier being declared in
parentheses.
* lisp/promodes/cc-mode.el (c-before-change): Supply a `beg' argument to
c-invalidate-sws-region-before.
* lisp/progmodes/cc-vars.el (c-noise-macro-with-parens-name-re)
(c-noise-macro-name-re, c-noise-macro-names, c-noise-macro-with-parens-names):
Make these buffer local variables.
This fixes a bug reported by Yasushi SHOJI <yasushi.shoji@gmail.com> to
emacs-devel on 2018-11-26, where wrong analysis and fontification occurred.
* lisp/progmodes/cc-engine.el (c-beginning-of-statement-1): Add new parameter
HIT-LIM which, if non-nil causes the function to return nil rather than 'same
when we reach the backward search limit without finding the beginning of
statement.
(c-just-after-func-arglist-p): Supply argument t to this new parameter in call
to c-beginning-of-statement-1.
