* doc/misc/emacs-mime.texi (time-date):
Adjust example to match new behavior.
* etc/NEWS: Mention this.
* lisp/calendar/time-date.el (decoded-time-add)
(decoded-time--alter-second):
Don’t lose underestimate precision of seconds component.
* src/bignum.c (mpz): Grow by 1.
* src/timefns.c (trillion_factor): New function.
(timeform_sub_ps_p): Remove.
(time_arith): Avoid unnecessarily-large hz, by reducing the hz
to a value no worse than the worse hz of the two arguments.
The result is always exact unless an error is signaled.
* test/src/timefns-tests.el (timefns-tests--decode-time):
New function.
(format-time-string-with-zone): Test (decode-time LOOK ZONE t)
resolution as well as its numeric value.
* lisp/emacs-lisp/easy-mmode.el (define-globalized-minor-mode): Accept
a BODY parameter.
* doc/lispref/modes.texi (Defining Minor Modes): Document new
parameter.
* etc/NEWS: Announce it.
* lisp/simple.el (read--expression): Move eldoc-mode setup to...
* lisp/emacs-lisp/eldoc.el (eldoc--eval-expression-setup): ... here,
new function.
(global-eldoc-mode): Add or remove it to
eval-expression-minibuffer-setup-hook when enabling or disabling
global-eldoc-mode. This enables eldoc in the minibuffer (solving
Bug#27202), only when global-eldoc-mode is enabled.
Also, improve the doc to match current behavior.
* doc/lispref/os.texi (Time Conversion): Document that
time-convert signals an error for infinite or NaN args,
and that (time-convert TIME t) is exact otherwise.
Mention float-time as an alternative to time-convert.
(Time Calculations): Document that time-add and time-subtract
are exact and do not decrease HZ below the minimum of their args.
* src/timefns.c (decode_float_time): Don’t signal an error for
floating-point arguments whose base-FLT_RADIX exponent is not less
than DBL_MANT_DIG. Instead, convert them to (TICKS . 1) values.
Use two (instead of three) integer exponent comparisons in the
typical case.
* test/src/timefns-tests.el (time-arith-tests):
Add more floating-point tests, including some tests
that the old code fails.
* doc/lispref/windows.texi (Quitting Windows): Mention in.
* lisp/window.el (quit-restore-window): Run the new
`quit-window-hook' before doing anything else (bug#9867).
(quit-window): Note that the hook will be run in the doc string.
* lisp/window.el (quit-window-hook): New variable.
* doc/lispref/processes.texi (Asynchronous Processes): Note that input
may read when sending data as well.
(Output from Processes): Note that functions which send data may also
trigger reading from processes.
(Input to Processes, Filter Functions): Note that filter functions may
be called recursively.
* doc/lispref/frames.texi (Frame Size): Document it.
* src/frame.c (Fset_frame_height):
(Fset_frame_width): Make into commands that use the numeric prefix
to set height/width (bug#9970).
Instead of appending a subseconds member to the result of
‘decode-time’, this keeps the format unchanged unless you give
a new optional argument to ‘decode-time’. Also, the augmented
format now puts the subsecond info in the SECONDS element, so
the total number of elements is unchanged; this is more
compatible with code that expects the traditional 9 elements,
such as ‘(pcase decoded-time (`(,SEC ,MIN ,HOUR ,DAY ,MON
,YEAR ,DOW ,DST ,ZONE) ...) ...)’.
* doc/lispref/os.texi, doc/misc/emacs-mime.texi, etc/NEWS:
* lisp/net/soap-client.el (soap-decode-date-time):
* lisp/simple.el (decoded-time):
Document the new behavior.
* lisp/calendar/icalendar.el (icalendar--decode-isodatetime):
* lisp/calendar/iso8601.el (iso8601-parse)
(iso8601-parse-time, iso8601-parse-duration)
(iso8601--decoded-time):
* lisp/calendar/parse-time.el (parse-time-string):
* lisp/calendar/time-date.el (decoded-time-add)
(decoded-time--alter-second):
* lisp/org/org.el (org-parse-time-string):
* lisp/simple.el (decoded-time):
* src/timefns.c (Fdecode_time, Fencode_time):
* test/lisp/calendar/icalendar-tests.el:
(icalendar--decode-isodatetime):
* test/lisp/calendar/iso8601-tests.el (test-iso8601-date-years)
(test-iso8601-date-dates, test-iso8601-date-obsolete)
(test-iso8601-date-weeks, test-iso8601-date-ordinals)
(test-iso8601-time, test-iso8601-combined)
(test-iso8601-duration, test-iso8601-intervals)
(standard-test-dates, standard-test-time-of-day-fractions)
(standard-test-time-of-day-beginning-of-day)
(standard-test-time-of-day-utc)
(standard-test-time-of-day-zone)
(standard-test-date-and-time-of-day, standard-test-interval):
* test/lisp/calendar/parse-time-tests.el (parse-time-tests):
* test/src/timefns-tests.el (format-time-string-with-zone)
(encode-time-dst-numeric-zone):
Revert recent changes that added a SUBSECS member to
calendrical timestamps, since that component is no longer
present (the info, if any, is now in the SECONDS member).
* lisp/calendar/time-date.el (decoded-time-add)
(decoded-time--alter-second):
Support fractional seconds in the new form. Simplify.
* src/timefns.c (Fdecode_time): Support new arg FORM.
(Fencode_time): Support subsecond resolution.
* test/src/timefns-tests.el (format-time-string-with-zone)
(decode-then-encode-time): Test subsecond calendrical timestamps.
* doc/emacs/windows.texi (Other Window): Mention
the `next-multiframe-window' command here (which is otherwise not
documented in the manual) (bug#12431).
* doc/lispref/commands.texi (Reading One Event): Mention that ""
has the same effect as nil as a prompt.
* src/lread.c (Fread_event, Fread_char_exclusive, Fread_char):
Mention what happens when PROMPT is nil/"" in the doc string
(bug#15012).
0860ac0 (origin/emacs-26) Improve documentation of features that use ...
fae1ff6 Fix docstrings in pong
82a2894 Improve doc strings of 'append-to-buffer' and friends
cb0403d Fix octave-mode ElDoc support
691790b Avoid Groff hanging on MS-Windows when invoked by "M-x man"
* doc/emacs/display.texi (Fringes): Add cross-reference to
where indicate-empty-lines is described.
(Useless Whitespace): Add an @anchor for a more accurate
cross-reference in "Fringes".
* lisp/calc/calc-forms.el (math-absolute-from-gregorian-dt):
Rewrite in a way that I understand, and that actually seems to work.
(math-absolute-from-julian-dt): Use Julian, not Gregorian, leap year
rules for counting days within a year.
(math-julian-date-beginning, math-julian-date-beginning-int):
Change constants to be consistent with their doc strings and the code:
use Rata Die epoch at Dec 31, 1 BC Gregorian proleptic, not Julian.
* doc/misc/calc.texi (Date Forms): Correct difference between Julian
Day and Rata Die.
* test/lisp/calc/calc-tests.el (calc-test-calendar): New test.
The list that decode-time returns now contains an extra
trailing component that counts the subseconds part of the
original timestamp (Bug#36549).
This builds on a suggestion by Lars Ingebrigtsen in:
https://lists.gnu.org/r/emacs-devel/2019-07/msg00734.html
* doc/lispref/os.texi (Time Conversion):
* doc/misc/emacs-mime.texi (time-date):
* etc/NEWS: Document this.
* lisp/calendar/icalendar.el (icalendar--decode-isodatetime):
* lisp/calendar/iso8601.el (iso8601-parse)
(iso8601-parse-time, iso8601-parse-duration)
(iso8601--decoded-time):
* lisp/calendar/parse-time.el (parse-time-string):
* lisp/calendar/time-date.el (make-decoded-time)
(decoded-time-set-defaults):
* lisp/org/org.el (org-fix-decoded-time)
(org-parse-time-string):
* src/timefns.c (Fdecode_time):
Generate subsec member for decoded time.
* lisp/calendar/time-date.el (decoded-time-add)
Add the decoded subsec too.
* lisp/simple.el (decoded-time): New subsec member.
* src/data.c (Frem): Simplify zero-check to match that of new Fmod.
(integer_mod): New function, with most of the guts of the old Fmod.
Remove redundant zero-check.
(Fmod): Use it.
* src/timefns.c (Fencode_time): Handle new subsec member
or (with the obsolescent calling convention) subsec arg.
It defaults to 0.
* test/lisp/calendar/icalendar-tests.el:
(icalendar--decode-isodatetime):
* test/lisp/calendar/iso8601-tests.el (test-iso8601-date-years)
(test-iso8601-date-dates, test-iso8601-date-obsolete)
(test-iso8601-date-weeks, test-iso8601-date-ordinals)
(test-iso8601-time, test-iso8601-combined)
(test-iso8601-duration, test-iso8601-intervals)
(standard-test-dates, standard-test-time-of-day-fractions)
(standard-test-time-of-day-beginning-of-day)
(standard-test-time-of-day-utc)
(standard-test-time-of-day-zone)
(standard-test-date-and-time-of-day, standard-test-interval):
* test/lisp/calendar/parse-time-tests.el (parse-time-tests):
* test/src/timefns-tests.el (format-time-string-with-zone)
(encode-time-dst-numeric-zone):
Adjust to match new behavior.
This replaces the awkward reuse of encode-time to both convert
calendrical timestamps to Lisp timestamps, and to convert Lisp
timestamps to other forms. Now, encode-time does just the
former and the new function does just the latter.
The new function builds on a suggestion by Lars Ingebrigtsen in:
https://lists.gnu.org/r/emacs-devel/2019-07/msg00801.html
and refined by Stefan Monnier in:
https://lists.gnu.org/r/emacs-devel/2019-07/msg00803.html
* doc/lispref/os.texi (Time of Day, Time Conversion):
* doc/misc/emacs-mime.texi (time-date):
* etc/NEWS: Update documentation.
* lisp/calendar/cal-dst.el (calendar-next-time-zone-transition):
* lisp/calendar/time-date.el (seconds-to-time, days-to-time):
* lisp/calendar/timeclock.el (timeclock-seconds-to-time):
* lisp/cedet/ede/detect.el (ede-detect-qtest):
* lisp/completion.el (cmpl-hours-since-origin):
* lisp/ecomplete.el (ecomplete-add-item):
* lisp/emacs-lisp/cl-extra.el (cl--random-time):
* lisp/emacs-lisp/timer.el (timer--time-setter)
(timer-next-integral-multiple-of-time):
* lisp/find-lisp.el (find-lisp-format-time):
* lisp/gnus/gnus-diary.el (gnus-user-format-function-d):
* lisp/gnus/gnus-group.el (gnus-group-set-timestamp):
* lisp/gnus/gnus-icalendar.el (gnus-icalendar-show-org-agenda):
* lisp/gnus/nnrss.el (nnrss-normalize-date):
* lisp/gnus/nnspool.el (nnspool-request-newgroups):
* lisp/net/ntlm.el (ntlm-compute-timestamp):
* lisp/net/pop3.el (pop3-uidl-dele):
* lisp/obsolete/vc-arch.el (vc-arch-add-tagline):
* lisp/org/org-clock.el (org-clock-get-clocked-time)
(org-clock-resolve, org-resolve-clocks, org-clock-in)
(org-clock-out, org-clock-sum):
* lisp/org/org-id.el (org-id-uuid, org-id-time-to-b36):
* lisp/org/ox-publish.el (org-publish-cache-ctime-of-src):
* lisp/proced.el (proced-format-time):
* lisp/progmodes/cc-cmds.el (c-progress-init)
(c-progress-update):
* lisp/progmodes/cperl-mode.el (cperl-time-fontification):
* lisp/progmodes/flymake.el (flymake--schedule-timer-maybe):
* lisp/progmodes/vhdl-mode.el (vhdl-update-progress-info)
(vhdl-fix-case-region-1):
* lisp/tar-mode.el (tar-octal-time):
* lisp/time.el (emacs-uptime):
* lisp/url/url-auth.el (url-digest-auth-make-cnonce):
* lisp/url/url-util.el (url-lazy-message):
* lisp/vc/vc-cvs.el (vc-cvs-parse-entry):
* lisp/vc/vc-hg.el (vc-hg-state-fast):
* lisp/xt-mouse.el (xterm-mouse-event):
* test/lisp/emacs-lisp/timer-tests.el:
(timer-next-integral-multiple-of-time-2):
Use time-convert, not encode-time.
* lisp/calendar/icalendar.el (icalendar--decode-isodatetime):
Don’t use now-removed FORM argument for encode-time.
It wasn’t crucial anyway.
* lisp/emacs-lisp/byte-opt.el (side-effect-free-fns): Add time-convert.
* lisp/emacs-lisp/elint.el (elint-unknown-builtin-args):
Update encode-time signature to match current arg set.
* lisp/emacs-lisp/timer.el (timer-next-integral-multiple-of-time):
Use timer-convert with t rather than doing it by hand.
* src/timefns.c (time_hz_ticks, time_form_stamp, lisp_time_form_stamp):
Remove; no longer needed.
(decode_lisp_time): Rturn the form instead of having a *PFORM arg.
All uses changed.
(time_arith): Just return TICKS if HZ is 1.
(Fencode_time): Remove argument FORM. All callers changed.
Do not attempt to encode time values; just encode
decoded (calendrical) times.
Unless CURRENT_TIME_LIST, just return VALUE since HZ is 1.
(Ftime_convert): New function, which does the time value
conversion that bleeding-edge encode-time formerly did.
Return TIME if it is easy to see that it is already
of the correct form.
(Fcurrent_time): Mention in doc that the form is planned to change.
* test/src/timefns-tests.el (decode-then-encode-time):
Don’t use (encode-time nil).
* doc/misc/emacs-mime.texi (time-date): Don’t give
parse-iso8601-time-string in the example, as the function is
not autoloaded.
* lisp/gnus/nndiary.el (nndiary-compute-reminders):
No need to call encode-time or use floating point here.
* doc/lispintro/emacs-lisp-intro.texi (Mode Line): Ditto.
* doc/lispref/modes.texi (Mode Line Top): In the :eval example,
use a function that exists to avoid confusion (bug#19224).
* doc/lispref/debugging.texi (Syntax Errors, Excess Open)
(Excess Close): Name the commands invoked by the key
sequences. Add cross-references to appropriate sections of
the Emacs manual. (Bug#21385)
(cherry picked from commit faafd467a3)
* doc/lispref/debugging.texi (Syntax Errors, Excess Open)
(Excess Close): Name the commands invoked by the key
sequences. Add cross-references to appropriate sections of
the Emacs manual. (Bug#21385)
* doc/lispref/package.texi (Simple Packages): Use one of the
approved keywords (bug#19490).
* doc/lispref/tips.texi (Library Headers): Use URL instead of
Homepage to make things consistent with "Simple Packages".
