362ca83a3b (origin/emacs-27) Let Emacs start even if curdir is inacce...
dd989c0ea0 * etc/NEWS: Mention GnuPG 2.0 through 2.1.5 issue (Bug#428...
4542b750cc Fix bug with ~/Emacs file not being read at init
9b403d624e ; Fix last change
6bff65a626 ; * doc/lispref/sequences.texi (Sequence Functions): Typo ...
3c4edfd85e Prevent from frozen frame after `C-z' in Lucid builds
98e8241992 Document the 'flex' completion style
19fa8b7ca3 Note that Emacs needs systemd support if systemd is used t...
# Conflicts:
# etc/NEWS
* lisp/textmodes/flyspell.el (flyspell-use-mouse-3-for-menu): Rename
from 'flyspell-correct-on-mouse-3'. The previous name did not make it
clear that it's about opening a menu. (Bug#11680)
(flyspell--set-use-mouse-3-for-menu): Rename from
'flyspell--set-correct-on-mouse-3'. Bind menu to 'down-mouse-3'
instead of 'mouse-3' to be more in line with user expectations.
(flyspell-mode): Use the above new names.
* doc/emacs/fixit.texi (Spelling):
* etc/NEWS: Update documentation to use the new name.
Suggested by Stefan Monnier <monnier@iro.umontreal.ca>.
* lisp/textmodes/flyspell.el
(flyspell-correct-on-mouse-3): New option to bind
'flyspell-correct-word' to 'mouse-3'.
(flyspell--set-correct-on-mouse-3): New function to update option.
(flyspell-mode): Update 'flyspell-mouse-map' if above option is
set.
* doc/emacs/fixit.texi (Spelling): Mention the new option.
* etc/NEWS: Announce the new option.
* doc/lispref/tips.texi (Comment Tips): Update information on section
headings to reflect common usage.
Previously the tips stated that if the code is split up into multiple
sections, then that should be done by splitting up the ";;; Code:"
section into multiple sub-sections.
However about half the libraries in Emacs instead use multiple
top-level sections. We update the tips (aka conventions) to allow
this common usage, but because it is awkward if there is a section
named "Code", which contains only some of the code instead of all of
it, we now recommend that that section should be empty in this case.
We cannot just give up on the "Code:" section/heading because that is
an old convention that is followed be nearly every library and because
it is likely that there are some utilities out there that depend on
its presence.
This was discussed in
https://lists.gnu.org/archive/html/emacs-devel/2020-07/msg00444.htmlhttps://lists.gnu.org/archive/html/emacs-devel/2020-08/msg00001.html
* doc/emacs/dired.texi (Operating on Files): Mention the new
defcustom (bug#25075).
* lisp/dired-aux.el (dired-do-copy): Invert the value of
`dired-copy-dereference' in lexical scope when prefix argument is
'(4). Update function documentation for the new defcustom.
* lisp/dired-aux.el (dired-copy-file): Use `dired-copy-dereference' as
the `dereference' argument to `dired-copy-file-recursive'.
* lisp/dired-aux.el (dired-copy-file-recursive): Add new optional
argument `dereference'.
* lisp/dired.el (dired-copy-dereference): New defcustom, defaults to
nil.
* doc/emacs/misc.texi (Single Shell): Reintroduce the actual
buffer names in the user manual (bug#39138), but keep the
references to the variables. It's easier for people reading the
user manual to deal with actual names.
Buffers `*Shell Command Output*' and `*Async Shell Command*'
have been around since a long time; used across several libraries,
they are de facto output buffers for shell commands.
* lisp/simple.el (shell-command-buffer-name)
(shell-command-buffer-name-async): New variables.
* lisp/dired-aux.el
* lisp/gnus/gnus-sum.el
* lisp/gnus/gnus-win.el
* lisp/ibuf-ext.el
* lisp/net/tramp.el: Use them.
* etc/NEWS (Changes in Emacs 28.1): Announce this change.
* doc/emacs/misc.texi (Single Shell)
* doc/misc/tramp.texi (Remote processes):
Update manual (bug#39138).
* lisp/whitespace.el (whitespace-missing-newline-at-eof): New face
(bug#34952).
(whitespace-report-region): Add a test for
end-of-buffer-without-newline.
(whitespace-color-on): Ditto.
* doc/emacs/display.texi (Useless Whitespace): Document it.
* lisp/gnus/mml.el (mml-parse-1): Use `data-encoding' to be
slightly less confusing than `content-transfer-encoding'.
* doc/misc/emacs-mime.texi (MML Definition): Document it.
* lisp/gnus/message.el (message-insert-screenshot): Adjust usage.
* doc/misc/message.texi (System Mailer Setup): Document the usage.
* lisp/gnus/gnus-art.el (gnus-url-mailto): Move most of the code
here to 'message-mailto-1' (bug#38314).
* lisp/gnus/message.el (message-parse-mailto-url): Mark as obsolete.
(message-parse-mailto-url): Rewritten slightly from the above.
(message-mailto): New command.
(message-mailto-1): New function.
The commands now also now work on archive and tar mode parent buffers.
* doc/emacs/files.texi (Image Mode): Document it.
* lisp/arc-mode.el (archive-goto-file): New function (bug#38647).
(archive-next-file-displayer): Ditto.
* lisp/image-mode.el (image-next-file): Reimplement to work on
displayed dired buffers and the like. This means that `n' and `p'
now works on the displayed ordering in the dired buffer, so if
you've reversed the sorting, `n' picks the right "next" file.
(image-mode--directory-buffers): New function.
(image-mode--next-file): Ditto.
* lisp/tar-mode.el (tar-goto-file): New function.
(tar-next-file-displayer): Ditto.
This should avoid some configuration confusion as exemplified
by Jeffrey Walton’s recent bug report (Bug#42675).
* configure.ac (opsys): Simplify Solaris configuration by
not worrying about Solaris 9 and earlier, as they are no
longer supported by the Solaris developers. This should
support Walton’s ‘./configure --build=x86_64-sun-solaris’.
Instead of bothering with ‘opsys=sol2-6’ and ‘opsys=sol2-10’,
just use ‘opsys=solaris’. All uses changed.
(emacs_check_sunpro_c): Remove unused var.
* doc/misc/tramp.texi (Remote programs):
* etc/MACHINES, etc/PROBLEMS:
Modernize PATH for Oracle Developer Studio.
* etc/PROBLEMS: Move Solaris-related problems to legacy area,
except those that are still relevant.
* doc/misc/message.texi (MIME): Document it.
* lisp/gnus/message.el (message-screenshot-command): New variable.
(message-mode-map): New keystroke and menu item. Also add
mml-attach-file to the menu.
(message-insert-screenshot): New command.
* lisp/gnus/mml.el (mml-parse-1): Allow having
content-transfer-encoding already in the part, so that we can have
inline base64-encoded binaries in the Message buffers.
* doc/misc/tramp.texi (Predefined connection information):
Add "direct-async-process".
(Remote processes): New subsection "Improving performance of
asynchronous remote processes".
* lisp/net/tramp-adb.el (tramp-methods) <adb>: Add `tramp-login-program'
and `tramp-login-args'.
(tramp-adb-handle-make-process): Use `tramp-handle-make-process'.
(tramp-adb-maybe-open-connection): Add "set +o vi +o emacs" command.
* lisp/net/tramp-sh.el (tramp-sh-handle-make-process):
Use `tramp-handle-make-process'.
(tramp-sh-file-name-handler-p, tramp-multi-hop-p): New defuns.
(tramp-compute-multi-hops): Use `tramp-multi-hop-p'.
* lisp/net/tramp.el (tramp-dissect-file-name, tramp-dissect-hop-name):
Use `tramp-multi-hop-p'.
(tramp-handle-insert-file-contents, tramp-local-host-p):
Use `tramp-sh-file-name-handler-p'.
(tramp-handle-make-process): New defun.
* test/README: Add another example how to use SELECTOR.
* test/lisp/net/tramp-tests.el (tramp-test03-file-name-method-rules):
Adapt test.
(tramp--test-sh-p): Use `tramp-sh-file-name-handler-p'.
* doc/misc/emacs-mime.texi (Display Customization): Document it.
* lisp/gnus/gnus-art.el (gnus-mime-display-single): Bind it.
* lisp/gnus/mm-view.el (mm-inline-font-lock): New variable (bug#38421).
(mm-display-inline-fontify): Use it.
* lisp/emacs-lisp/edebug.el (edebug-match-:unique): Add a new
‘:unique’ specifier to generate unique names.
* lisp/emacs-lisp/cl-macs.el (cl-flet): Use it. This requires
inlining the ‘cl-defun’ specification.
* test/lisp/emacs-lisp/edebug-tests.el (edebug-tests-cl-flet): New
unit test.
* doc/lispref/edebug.texi (Specification List): Document new ‘:unique’
construct.
