* lisp/epg.el (epg--start): Passphrase entry through the
minibuffer is currently not supported with gpgsm, therefore don't
pass "--pinentry-mode loopback" as an argument when the protocol
is CMS. (Bug#67012)
* doc/misc/epa.texi (GnuPG Pinentry): Document it.
This fixes the second (last) part of bug#66911. The new second
anchor points allow the indentation of braces in template
classes to be anchored on the keyword 'class' rather than the
`template' at the beginning of the statement.
* lisp/progmodes/cc-engine.el (c-add-class-syntax): Add &rest
args parameter for additional anchor points. Pass these to
c-add-syntax.
(c-guess-continued-construct): CASE B.1: Note return value from
c-looking-at-decl-block and pass this to c-add-syntax for a
class-open construct.
(c-guess-basic-syntax): CASE 4: Duplicate anchor position for
class-open.
(c-guess-basic-syntax): CASE 5A.2: Note return value of
c-looking-at-decl-block and pass it as extra argument to
c-add-syntax for a class-open construct.
(c-guess-basic-syntax): CASE 5G: Call c-looking-at-decl-block
to determine the second anchor point for a class-close, and
pass it to c-add-class-syntax.
* doc/misc/cc-mode.texi (Class Symbols): Document the anchor
points for class-open and class-close.
* doc/misc/erc.texi: Add entry for `command-indicator' to Modules
chapter.
* etc/ERC-NEWS: Mention new module `command-indicator'.
* lisp/erc/erc-goodies.el (erc-noncommands-list): Replace the
nonexistent `erc-cmd-SMV' with function `erc-cmd-SAY'.
(erc-noncommands-mode, erc-noncommands-enable,
erc-noncommands-disable): Deprecate this module because it's a no-op.
(erc-command-indicator-face, erc-command-indicator): Migrate from main
library.
(erc-command-indicator-mode, erc-command-indicator-enable,
erc-command-indicator-disable): New module to take the spiritual place
of `noncommands'.
(erc-command-indicator): Move function here from main library, along
with option namesake mentioned above.
(erc-command-indicator-toggle-hidden): New command to toggle echoed
command-line visibility.
(erc--command-indicator-permit-insertion): New function.
(erc--command-indicator-display): New function, a slightly revised
version of the old `erc-display-command' from the main library. Its
only call site was removed back in d1036d288d "backport: erc
bugfixes". However, references were left behind to associated assets,
like `erc-command-indicator', etc. The function was later commented
out in 0c599ee2e2 "* lisp/erc/erc.el: Use `run-hook-with-args` for
`erc-pre-send-functions`", and then removed by a63ed6f78a "Remove
duplicate ERC prompt on reconnect".
* lisp/erc/erc-match.el (erc-match-toggle-hidden-fools): Use new
non-module-specific name for `erc-match--toggle-hidden'.
(erc-match--toggle-hidden): Move to main library for shared use by
other modules.
* lisp/erc/erc.el (erc-hide-prompt): Leave note explaining updated
role.
(erc-command-indicator): Move option and function of same name to
erc-goodies.
(erc-command-indicator-face): Move to erc-goodies.
(erc-modules): Remove module `noncommands' from standard value and
Custom set. Add `command-indicator' to set.
(erc--toggle-hidden): "New" function, a rebranded version of the
utility `erc-match--toggle-hidden' from erc-match.
(erc--send-input-lines): Accommodate modules wanting alternate
insertion functions.
(erc-load-irc-script-lines): Account for `erc-command-indicator' no
longer being defined in this library.
* test/lisp/erc/erc-scenarios-base-send-message.el
(erc-scenarios-base-send-message--command-indicator): New test.
* test/lisp/erc/erc-tests.el (erc-tests--modules): Remove
deprecated module `noncommands' from manifest. (Bug#67031)
* doc/misc/efaq.texi (Start Emacs Maximized): Rename node from
"Fullscreen mode on MS-Windows". Make advice portable to other
platforms, and remove MS-Windows specific hacks.
Ref: https://lists.gnu.org/r/emacs-devel/2023-10/msg00733.html
Co-authored-by: David Hedlund <public@beloved.name>
5f60913208 Fix State button for customize-icon (Bug#66635)
27c71979ff ; Another Texinfo fix
889a550ca0 ; Fix Texinfo warnings
893c344b4e Fix the use of adaptive-fill-regexp in treesit indent preset
1098c114b7 Fix treesit-install-language-grammar (bug#66673)
491ee428c0 Fix treesit-explore-mode (bug#66431)
ee043a2703 tsx-ts-mode--font-lock-compatibility-bb1f97b: Re-fix the ...
* doc/misc/tramp.texi (Traces and Profiles): Don't mimic
@enumerate with @indentedblock, which is absent from Texinfo
4.13.
* doc/misc/use-package.texi (Global keybindings): Remove stray
comma after @xref.
* lisp/eshell/esh-arg.el (eshell-get-marker, eshell-insert-marker)
(eshell-complete-marker-ref): New functions...
(eshell-special-ref-alist): ... Add them to the new "marker" entry.
* test/lisp/eshell/esh-arg-tests.el
(esh-arg-test/special-reference/marker)
(esh-arg-test/special-reference/nested)
(esh-arg-test/special-reference/lisp-form):
* test/lisp/eshell/em-cmpl-tests.el
(em-cmpl-test/special-ref-completion/type)
(em-cmpl-test/special-ref-completion/marker): New tests.
* doc/misc/eshell.texi (Arguments): Document the new special ref type.
* etc/NEWS: Announce this change (bug#66458).
* lisp/eshell/esh-cmd.el (eshell--region-p, eshell-with-temp-command):
Move to...
* lisp/eshell/esh-util.el (eshell--region-p)
(eshell-with-temp-command): ... here.
* lisp/eshell/em-cmpl.el (eshell-complete-parse-arguments): Fix edge
case when 'end' is at beginning of (possibly-narrowed) buffer.
* lisp/eshell/esh-arg.el (eshell-special-ref-alist) New variable...
(eshell-special-ref-default): ... New option...
(eshell--special-ref-function): ... New function...
(eshell-parse-special-reference): ... use them.
(eshell-insert-special-reference): New function.
(eshell-complete-special-reference): Reimplement to use a nested call
to Pcomplete.
(eshell-complete-buffer-ref): New function.
* lisp/eshell/esh-proc.el (eshell-proc-initialize): Add "process"
special ref type here.
(eshell-complete-process-ref): New function.
* doc/misc/eshell.texi (Bugs and ideas): Remove now-implemented idea.
* lisp/gnus/nnweb.el (nnweb-type, nnweb-type-definition): Remove gmane.
(nnweb-gmane-create-mapping, nnweb-gmane-wash-article)
(nnweb-gmane-search, nnweb-gmane-identity): Make obsolete.
(nnweb-definition, nnweb-init): Raise user-error when 'nnweb-type' is
'gmane'.
* doc/misc/gnus.texi (Registry Article Refer Method): Update
example to not use gmane.org.
Ref: https://gmane.io/
* doc/lispref/frames.texi (Accessing Selections, X Selections):
Correct markup, averting the recognition of X followed by a
sentence stop as an acronym.
(Other Selections): Relate the nature of the MS-Windows
selection emulation, how it functions, and its deficiencies.
Clarify paragraphs concerning PGTK and Nextstep.
* doc/misc/efaq.texi (Emacs in a Linux console):
* doc/misc/use-package.texi (Conditional loading): Correct
markup, averting the recognition of X followed by a sentence
stop as an acronym.
* doc/misc/trampver.texi:
* lisp/net/trampver.el: Change version to "2.6.2.29.2".
(customize-package-emacs-version-alist):
Adapt Tramp version integrated in Emacs 29.2.
* doc/misc/url.texi: Mention version 4a in SOCKS portion of "Gateways
in general" node.
* etc/NEWS: Mention version 4a support in new `socks' section.
* lisp/net/socks.el (socks-server): Add new Custom choice `4a' for
version field. This change does not further overload the field in
terms of expected type because `socks-send-command' and `socks-filter'
already accommodate the symbol `http'.
(socks--errors-4): Add new constant containing error messages for
version 4. The semantics are faithful to the de facto spec, but the
exact wording is slightly adapted.
(socks-filter): Allow for a null "type" field on error with version 5.
Previously, certain errors would not propagate because a wrong-type
signal would get in the way.
(socks-send-command): Massage existing version 4 protocol parsing to
accommodate 4a, and add error handling for version 4. Use variable
`socks-username' for v4 variable-length ID field instead of calling
`user-full-name', which has potential privacy implications.
* test/lisp/net/socks-tests.el (socks-tests-v4-basic): Don't mock
`user-full-name' because `socks-send-command' no longer calls it to
determine the ID.
(socks-tests-v4a-basic, socks-tests-v4a-error): Add a couple tests for
SOCKS version 4a. (Bug#53941)
* doc/misc/erc.texi: Add new subheading "Module Loading" under the
"Modules" chapter.
* lisp/erc/erc.el (erc--sort-modules): New utility function to sort
and dedupe modules.
(erc-modules): In `custom-set' function, factor out collation into
separate utility `erc--sort-modules'.
(erc-update-modules): Call `erc--update-modules' with an argument, the
current value of `erc-modules'.
(erc--aberrant-modules): New variable, a list of symbols whose modules
ERC suspects of being incorrectly defined.
(erc--warn-about-aberrant-modules): New function to print an error
message and emit a warning prior to connecting when
`erc--aberrant-modules' is non-nil.
(erc--find-mode): Make heuristic more robust by always checking for a
mode activation command rather than just a state variable. This fixes
a compatibility bug, new in 5.6, affecting third-party modules that
autoload module definitions instead of their corresponding
mode-activation commands.
(erc--update-modules): Add new positional argument `modules'.
(erc--setup-buffer-hook): Add new default member,
`erc--warn-about-aberrant-modules'.
(erc-open): Pass sorted `erc-modules' to `erc--update-modules'.
* test/lisp/erc/erc-tests.el (erc--sort-modules): New test.
(erc-tests--update-modules): New fixture.
(erc--update-modules): Remove and rework as three separate tests
dedicated to specific contexts. The existing one had poor coverage
and was difficult, if not impossible, to follow.
(erc--update-modules/unknown, erc--update-modules/local,
erc--update-modules/realistic): New tests. (Bug#57955)
* doc/misc/cl.texi: (Printing): New chapter which documents
cl-print.el.
* NEWS (cl-print): Add "+++" markings to all the subitems,
which have now been documented.
This really just generalizes Eshell's previous support for iterative
evaluation of a single current command to a list of multiple commands,
of which at most one can be in the foreground (bug#66066).
* lisp/eshell/esh-cmd.el (eshell-last-async-procs)
(eshell-current-command): Make obsolete in favor of...
(eshell-foreground-command): ... this
(eshell-background-commands): New variable.
(eshell-interactive-process-p): Make obsolete.
(eshell-head-process, eshell-tail-process): Use
'eshell-foreground-command'.
(eshell-cmd-initialize): Initialize new variables.
(eshell-add-command, eshell-remove-command)
(eshell-commands-for-process): New functions.
(eshell-parse-command): Make 'eshell-do-subjob' the outermost call.
(eshell-do-subjob): Call 'eshell-resume-eval' to split this command
off from its parent forms.
(eshell-eval-command): Use 'eshell-add-command'.
(eshell-resume-command): Use 'eshell-commands-for-process'.
(eshell-resume-eval): Take a COMMAND argument. Return
':eshell-background' form for deferred background commands.
(eshell-do-eval): Remove check for 'eshell-current-subjob-p'. This is
handled differently now.
* lisp/eshell/eshell.el (eshell-command): Wait for all processes to
exit when running synchronously.
* lisp/eshell/esh-mode.el (eshell-intercept-commands)
(eshell-watch-for-password-prompt):
* lisp/eshell/em-cmpl.el (eshell-complete-parse-arguments):
* lisp/eshell/em-smart.el (eshell-smart-display-move): Use
'eshell-foreground-command'.
* test/lisp/eshell/esh-cmd-tests.el
(esh-cmd-test/background/simple-command)
(esh-cmd-test/background/subcommand): New tests.
(esh-cmd-test/throw): Use 'eshell-foreground-command'.
* test/lisp/eshell/eshell-tests.el (eshell-test/queue-input): Use
'eshell-foreground-command'.
* test/lisp/eshell/em-script-tests.el
(em-script-test/source-script/background): Make the test script more
complex.
* test/lisp/eshell/eshell-tests.el
(eshell-test/eshell-command/pipeline-wait): New test.
* doc/misc/eshell.texi (Bugs and ideas): Remove implemented feature.
In the Emacs Lisp manual, we refer to "text terminals" and "graphical
terminals" (see Info node `(elisp) Frames'). But in some places,
including the user manual, the alternative terminology "non-window
terminals" is used instead.
In other places, we use the terminology "non-windowing display"
instead of the more canonical "non-graphical display".
This is less clear than it could be. Let's consolidate our
terminology to prefer the wording from the Emacs Lisp manual; in other
words, prefer "text" and "non-graphical" to "non-window".
* doc/emacs/frames.texi (Non-Window Terminals): Rename node from this...
(Text Terminals): ...to this. (Bug#66282)
* doc/emacs/display.texi (Standard Faces):
* doc/emacs/emacs.texi (Top):
* doc/emacs/misc.texi (emacsclient Options):
* doc/misc/viper.texi (Rudimentary Changes)
(Packages that Change Keymaps):
* doc/emacs/frames.texi (Frames, Frame Commands, Mouse Avoidance):
Replace instances of "non-window terminals" with "text terminals".
* doc/misc/ediff.texi (Quick Help Customization):
(Window and Frame Configuration):
* lisp/vc/ediff.el (ediff-windows-wordwise)
(ediff-windows-linewise): Prefer saying 'non-graphical display' to
'non-windowing display'.
* lisp/net/tramp.el (tramp-default-method):
* lisp/printing.el (pr-find-command): Capitalize 'Windows' where it
clearly refers to the non-free operating system with that name.
* doc/misc/modus-themes.org
(Option for reloading the theme on custom change)
(Option for disabling other themes while loading Modus)
(Option for completion framework aesthetics)
(Option for org-mode block styles, Get a single color from the palette)
(Add padding to mode line, Note on SHR fonts)
(Note on goto-address-mode faces): Use correct markup for 'nil'.
(Custom Org todo keyword and priority faces): Reword statements and
update the value of sample configuration blocks.
(Use more spacious margins or padding in Emacs frames): Mention the
'spacious-padding' package on GNU ELPA.
(Full support for packages or face groups): Document newly supported
packages and remove those that are no longer covered explicitly.
(Indirectly covered packages): Note that css-mode is covered
indirectly.
(Acknowledgements): Expand list of people who have helped with the
project.
* etc/themes/modus-operandi-deuteranopia-theme.el (unless): Add
theme-autoload cookie and relevant metadata.
(modus-operandi-deuteranopia): Expand or tweak the palette, where
necessary.
* etc/themes/modus-operandi-theme.el (unless): Add theme-autoload
cookie and relevant metadata.
(modus-operandi): Expand or tweak the palette, where necessary.
* etc/themes/modus-operandi-tinted-theme.el (unless): Add
theme-autoload cookie and relevant metadata.
(modus-operandi-tinted): Expand or tweak the palette, where necessary.
* etc/themes/modus-operandi-tritanopia-theme.el (unless): Add
theme-autoload cookie and relevant metadata.
(modus-operandi-tritanopia): Expand or tweak the palette, where
necessary.
* etc/themes/modus-vivendi-deuteranopia-theme.el (unless): Add
theme-autoload cookie and relevant metadata.
(modus-vivendi-deuteranopia): Expand or tweak the palette, where
necessary.
* etc/themes/modus-vivendi-theme.el (unless): Add theme-autoload
cookie and relevant metadata.
(modus-vivendi): Expand or tweak the palette, where necessary.
* etc/themes/modus-vivendi-tinted-theme.el (unless): Add
theme-autoload cookie and relevant metadata.
(modus-vivendi-tinted): Expand or tweak the palette, where necessary.
* etc/themes/modus-vivendi-tritanopia-theme.el (unless): Add
theme-autoload cookie and relevant metadata.
(modus-vivendi-tritanopia): Expand or tweak the palette, where
necessary.
* etc/themes/modus-themes.el (modus-themes-preset-overrides-faint)
(modus-themes-preset-overrides-intense)
(modus-themes-preset-overrides-warmer): Make minor tweaks.
(modus-themes--annotate-theme, modus-themes--select-prompt)
(modus-themes--toggle-theme-p, modus-themes-toggle)
(modus-themes--list-colors-prompt, modus-themes--heading)
(modus-themes-faces): Refine internal functions.
The detailed release notes are available here:
<https://protesilaos.com/codelog/2023-09-19-modus-themes-4-3-0/>.
* doc/misc/erc.texi: Fix `display-buffer-alist' example and mention
that it's only meant for users of Emacs 29 and above.
* test/lisp/erc/erc-tests.el (erc-setup-buffer--custom-action): Add
simplistic test case for example in manual.
