Merge branch 'emacs-27' of git.sv.gnu.org:/srv/git/emacs into emacs-27

admin/release-process

@@ -195,6 +195,17 @@ pt-br	Rodrigo Real
 ru	Alex Ott
 sk	Miroslav Vaško
 
+** Update some files from their upstream.
+
+Some files in Emacs are copies of data files maintained elsewhere.
+Make sure that they are reasonably up-to-date.
+
+- etc/publicsuffix.txt
+https://publicsuffix.org/list/public_suffix_list.dat
+
+- leim/SKK-DIC/SKK-JISYO.L
+https://raw.githubusercontent.com/skk-dev/dict/master/SKK-JISYO.L
+
 * BUGS
 
 ** Check for modes which bind M-s that conflicts with a new global binding M-s

doc/lispref/commands.texi

@@ -1346,10 +1346,11 @@ button.  @xref{Repeat Events}.
 
   To access the contents of a mouse position list in the
 @var{position} slot of a click event, you should typically use the
-functions documented in @ref{Accessing Mouse}.  The explicit format of
+functions documented in @ref{Accessing Mouse}.
-the list depends on where the click occurred.  For clicks in the text
+
-area, mode line, header line, tab line, or in the fringe or marginal
+The explicit format of the list depends on where the click occurred.
-areas, the mouse position list has the form
+For clicks in the text area, mode line, header line, tab line, or in
+the fringe or marginal areas, the mouse position list has the form
 
 @example
 (@var{window} @var{pos-or-area} (@var{x} . @var{y}) @var{timestamp}
@@ -1479,6 +1480,45 @@ handle), @code{up} (the up arrow at one end of the scroll bar), or
 @c The 'top', 'bottom', and 'end-scroll' codes don't seem to be used.
 @end table
 
+For clicks on the frame's internal border (@pxref{Frame Layout}),
+@var{position} has this form:
+
+@example
+ (@var{frame} @var{part} (@var{X} . @var{Y}) @var{timestamp})
+@end example
+
+@table @asis
+@item @var{frame}
+The frame whose internal border was clicked on.
+
+@item @var{part}
+The part of the internal border which was clicked on.  This can be one
+of the following:
+
+@table @code
+@item nil
+The frame does not have an internal border.  This usually happens on
+text-mode frames.  This can also happen on GUI frames with internal
+border if the frame doesn't have its @code{drag-internal-border}
+parameter (@pxref{Mouse Dragging Parameters}) set to a non-@code{nil}
+value.
+
+@item left-edge
+@itemx top-edge
+@itemx right-edge
+@itemx bottom-edge
+The click was on the corresponding border at an offset of at least one
+canonical character from the border's nearest corner.
+
+@item top-left-corner
+@itemx top-right-corner
+@itemx bottom-right-corner
+@itemx bottom-left-corner
+The click was on the corresponding corner of the internal border.
+@end table
+
+@end table
+
 
 @node Drag Events
 @subsection Drag Events

doc/lispref/sequences.texi

@@ -658,8 +658,13 @@ for which @var{predicate} returns @code{nil}.
 @var{initial-value} and the first element of @var{sequence}, then calling
 @var{function} with that result and the second element of @var{sequence},
 then with that result and the third element of @var{sequence}, etc.
-@var{function} should be a function of two arguments.  If
+@var{function} should be a function of two arguments.
-@var{sequence} is empty, this returns @var{initial-value} without
+
+@var{function} is called with two arguments.  @var{intial-value}
+(and then the accumulated value) is used as the first argument, and
+the elements in @var{sequence} are used for the second argument.
+
+If @var{sequence} is empty, this returns @var{initial-value} without
 calling @var{function}.
 
 @example

doc/lispref/tips.texi

@@ -94,6 +94,11 @@ it to Emacs.  If and when we do, we can change the name easily enough.
 If one prefix is insufficient, your package can use two or three
 alternative common prefixes, so long as they make sense.
 
+@item
+We recommend enabling @code{lexical-binding} in new code, and
+converting existing Emacs Lisp code to enable @code{lexical-binding}
+if it doesn't already.  @xref{Using Lexical Binding}.
+
 @item
 Put a call to @code{provide} at the end of each separate Lisp file.
 @xref{Named Features}.
@@ -963,7 +968,7 @@ explains these conventions, starting with an example:
 
 @smallexample
 @group
-;;; foo.el --- Support for the Foo programming language
+;;; foo.el --- Support for the Foo programming language  -*- lexical-binding: t; -*-
 
 ;; Copyright (C) 2010-2020 Your Name
 @end group
@@ -986,14 +991,14 @@ explains these conventions, starting with an example:
   The very first line should have this format:
 
 @example
-;;; @var{filename} --- @var{description}
+;;; @var{filename} --- @var{description}  -*- lexical-binding: t; -*-
 @end example
 
 @noindent
-The description should be contained in one line.  If the file
+The description should be contained in one line.  If the file needs to
-needs a @samp{-*-} specification, put it after @var{description}.
+set more variables in the @samp{-*-} specification, add it after
-If this would make the first line too long, use a Local Variables
+@code{lexical-binding}.  If this would make the first line too long, use
-section at the end of the file.
+a Local Variables section at the end of the file.
 
   The copyright notice usually lists your name (if you wrote the
 file).  If you have an employer who claims copyright on your work, you

doc/misc/info.texi

@@ -798,17 +798,17 @@ in cross references and node names if it differs from the current
 file, so you can always know that you are going to be switching to
 another manual and which one.
 
-However, Emacs normally hides some other text in cross-references.
+Emacs normally hides some text in cross references.  If you put your
-If you put your mouse over the cross reference, then the information
+mouse over the cross reference, then the information appearing in a
-appearing in a separate box (tool tip) or in the echo area will show
+separate box (tool tip) or in the echo area will show the full
-the full cross-reference including the file name and the node name of
+cross reference, including the file name and the node name of the
-the cross reference.  If you have a mouse, just leave it over the
+cross reference if it leads to another file.  If you have a mouse,
-cross reference @xref{Top,, Overview of Texinfo, texinfo, Texinfo:
+just leave it over the next cross reference: @xref{Top,, Overview of
-The GNU Documentation Format}, and watch what happens.  If you
+Texinfo, texinfo, Texinfo: The GNU Documentation Format}, and watch
-always like to have that information visible without having to move
+what happens.  If you always like to have that information visible
-your mouse over the cross reference, use @kbd{M-x visible-mode}, or
+without having to move your mouse over the cross reference, use
-set @code{Info-hide-note-references} to a value other than @code{t}
+@kbd{M-x visible-mode}, or set @code{Info-hide-note-references} to a
-(@pxref{Emacs Info Variables}).
+value other than @code{t} (@pxref{Emacs Info Variables}).
 
 @format
 >> Now type @kbd{n} to learn more commands.
@@ -1227,12 +1227,20 @@ not scroll with the rest of the buffer, making these links always
 visible.
 
 @item Info-hide-note-references
-As explained in earlier nodes, the Emacs version of Info normally
+As explained in earlier sections, the Emacs version of Info normally
-hides some text in menus and cross-references.  You can completely
+hides some text in menus and cross references.  It also replaces the
-disable this feature, by setting this option to @code{nil}.  Setting
+@samp{*note} prefix of each cross reference with a more grammatically
-it to a value that is neither @code{nil} nor @code{t} produces an
+correct @samp{see}.  This is the effect of the default value of this
-intermediate behavior, hiding a limited amount of text, but showing
+option, @code{t}.  Setting this option to @code{nil} disables both
-all text that could potentially be useful.
+hiding and replacing of the original cross reference text, and Emacs
+will then display them as they are in the Info file.  If you set it to
+the value @code{hide}, Emacs will do the same as with @code{t}, but
+will also remove @samp{*note} without replacing it with anything.
+Setting it to any other non-@code{nil} value produces an intermediate
+behavior, hiding a limited amount of text, but showing all text that
+could potentially be useful, including the name of the node that is
+the target of the cross reference and its file if it is different from
+the current file.
 
 @item Info-scroll-prefer-subnodes
 If set to a non-@code{nil} value, @key{SPC} and @key{BACKSPACE} (or

lisp/Makefile.in

@@ -525,4 +525,10 @@ $(lisp)/progmodes/cc-mode.elc: $(lisp)/progmodes/cc-langs.elc \
 $(lisp)/progmodes/cc-styles.elc: $(lisp)/progmodes/cc-vars.elc \
    $(lisp)/progmodes/cc-align.elc
 
+# https://debbugs.gnu.org/43037
+# js.elc (like all modes using CC Mode's compile time macros) needs to
+# be compiled under the same version of CC Mode it will run with.
+$(lisp)/progmodes/js.elc: $(lisp)/progmodes/cc-defs.elc \
+   $(lisp)/progmodes/cc-engine.elc $(lisp)/progmodes/cc-mode.elc
+
 # Makefile ends here.

lisp/emacs-lisp/seq.el

@@ -336,9 +336,11 @@ list."
   "Reduce the function FUNCTION across SEQUENCE, starting with INITIAL-VALUE.
 
 Return the result of calling FUNCTION with INITIAL-VALUE and the
-first element of SEQUENCE, then calling FUNCTION with that result and
+first element of SEQUENCE, then calling FUNCTION with that result
-the second element of SEQUENCE, then with that result and the third
+and the second element of SEQUENCE, then with that result and the
-element of SEQUENCE, etc.
+third element of SEQUENCE, etc.  FUNCTION will be called with
+INITIAL-VALUE (and then the accumulated value) as the first
+argument, and the elements from SEQUENCE as the second argument.
 
 If SEQUENCE is empty, return INITIAL-VALUE and FUNCTION is not called."
   (if (seq-empty-p sequence)

lisp/info.el

@@ -305,10 +305,11 @@ when you hit the end of the current node."
 
 (defcustom Info-hide-note-references t
   "If non-nil, hide the tag and section reference in *note and * menu items.
-If value is non-nil but not `hide', also replaces the \"*note\" with \"see\".
+If the value is t, the default, replace \"*note\" with \"see\".
-If value is non-nil but not t or `hide', the reference section is still shown.
+If the value is `hide', remove \"*note\" without replacing it with anything.
-nil completely disables this feature.  If this is non-nil, you might
+If value is non-nil, but not t or `hide', the reference section is still shown.
-want to set `Info-refill-paragraphs'."
+nil completely disables this feature, leaving the original \"*note\" visible.
+If this is non-nil, you may wish setting `Info-refill-paragraphs' non-nil."
   :version "22.1"
   :type '(choice (const :tag "No hiding" nil)
 		 (const :tag "Replace tag and hide reference" t)

lisp/minibuffer.el

@@ -783,10 +783,14 @@ The text is displayed for `minibuffer-message-clear-timeout' seconds
 whichever comes first.
 Unlike `minibuffer-message', this function is called automatically
 via `set-message-function'."
+  (let* ((minibuf-window (active-minibuffer-window))
+         (minibuf-frame (and (window-live-p minibuf-window)
+                             (window-frame minibuf-window))))
     (when (and (not noninteractive)
-             (window-live-p (active-minibuffer-window))
+               (window-live-p minibuf-window)
-             (eq (window-frame) (window-frame (active-minibuffer-window))))
+               (or (eq (window-frame) minibuf-frame)
-    (with-current-buffer (window-buffer (active-minibuffer-window))
+                   (eq (frame-parameter minibuf-frame 'minibuffer) 'only)))
+      (with-current-buffer (window-buffer minibuf-window)
         (setq message (if (string-match-p "\\` *\\[.+\\]\\'" message)
                           ;; Make sure we can put-text-property.
                           (copy-sequence message)
@@ -794,7 +798,8 @@ via `set-message-function'."
         (unless (or (null minibuffer-message-properties)
                     ;; Don't overwrite the face properties the caller has set
                     (text-properties-at 0 message))
-        (setq message (apply #'propertize message minibuffer-message-properties)))
+          (setq message
+                (apply #'propertize message minibuffer-message-properties)))
 
         (clear-minibuffer-message)
 
@@ -821,7 +826,7 @@ via `set-message-function'."
 
         ;; Return `t' telling the caller that the message
         ;; was handled specially by this function.
-      t)))
+        t))))
 
 (setq set-message-function 'set-minibuffer-message)
 

src/keyboard.c

@@ -5246,7 +5246,6 @@ make_lispy_position (struct frame *f, Lisp_Object x, Lisp_Object y,
 					extra_info)));
     }
 
-#ifdef HAVE_WINDOW_SYSTEM
   else if (f)
     {
       /* Return mouse pixel coordinates here.  */
@@ -5254,7 +5253,9 @@ make_lispy_position (struct frame *f, Lisp_Object x, Lisp_Object y,
       xret = XFIXNUM (x);
       yret = XFIXNUM (y);
 
-      if (FRAME_LIVE_P (f)
+#ifdef HAVE_WINDOW_SYSTEM
+      if (FRAME_WINDOW_P (f)
+	  && FRAME_LIVE_P (f)
 	  && FRAME_INTERNAL_BORDER_WIDTH (f) > 0
 	  && !NILP (get_frame_param (f, Qdrag_internal_border)))
 	{
@@ -5263,8 +5264,8 @@ make_lispy_position (struct frame *f, Lisp_Object x, Lisp_Object y,
 
 	  posn = builtin_lisp_symbol (internal_border_parts[part]);
 	}
-    }
 #endif
+    }
 
   else
     window_or_frame = Qnil;

src/xdisp.c

@@ -22793,6 +22793,10 @@ maybe_produce_line_number (struct it *it)
   int lnum_face_id = merge_faces (it->w, Qline_number, 0, DEFAULT_FACE_ID);
   int current_lnum_face_id
     = merge_faces (it->w, Qline_number_current_line, 0, DEFAULT_FACE_ID);
+  /* From here onwards, we must prevent freeing realized faces, because
+     we are using the above 2 face IDs for the glyphs we produce.  */
+  bool save_free_realized_faces = inhibit_free_realized_faces;
+  inhibit_free_realized_faces = true;
   /* Compute point's line number if needed.  */
   if ((EQ (Vdisplay_line_numbers, Qrelative)
        || EQ (Vdisplay_line_numbers, Qvisual)
@@ -22922,10 +22926,13 @@ maybe_produce_line_number (struct it *it)
 	  it->lnum_width = 0;
 	  it->lnum_pixel_width = 0;
 	  bidi_unshelve_cache (itdata, false);
+	  inhibit_free_realized_faces = save_free_realized_faces;
 	  return;
 	}
     }
 
+  inhibit_free_realized_faces = save_free_realized_faces;
+
   /* Record the width in pixels we need for the line number display.  */
   it->lnum_pixel_width = tem_it.current_x;
   /* Copy the produced glyphs into IT's glyph_row.  */