"""
build123d imports

name: test_wire.py
by:   Gumyr
date: January 22, 2025

desc:
    This python module contains tests for the build123d project.

license:

    Copyright 2025 Gumyr

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

        http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.

"""

import math
import random
import unittest

import numpy as np
from build123d.topology.shape_core import TOLERANCE

from build123d.build_enums import GeomType, Side
from build123d.build_line import BuildLine
from build123d.geometry import Axis, Color, Location, Plane, Vector
from build123d.objects_curve import Curve, Line, PolarLine, Polyline, Spline
from build123d.objects_sketch import Circle, Rectangle, RegularPolygon
from build123d.operations_generic import fillet
from build123d.topology import Edge, Face, Wire
from OCP.BRepAdaptor import BRepAdaptor_CompCurve


class TestWire(unittest.TestCase):
    def test_ellipse_arc(self):
        full_ellipse = Wire.make_ellipse(2, 1)
        half_ellipse = Wire.make_ellipse(
            2, 1, start_angle=0, end_angle=180, closed=True
        )
        self.assertAlmostEqual(full_ellipse.area / 2, half_ellipse.area, 5)

    def test_stitch(self):
        half_ellipse1 = Wire.make_ellipse(
            2, 1, start_angle=0, end_angle=180, closed=False
        )
        half_ellipse2 = Wire.make_ellipse(
            2, 1, start_angle=180, end_angle=360, closed=False
        )
        ellipse = half_ellipse1.stitch(half_ellipse2)
        self.assertEqual(len(ellipse.wires()), 1)

    def test_fillet_2d(self):
        square = Wire.make_rect(1, 1)
        squaroid = square.fillet_2d(0.1, square.vertices())
        self.assertAlmostEqual(
            squaroid.length, 4 * (1 - 2 * 0.1) + 2 * math.pi * 0.1, 5
        )
        square.wrapped = None
        with self.assertRaises(ValueError):
            square.fillet_2d(0.1, square.vertices())

    def test_chamfer_2d(self):
        square = Wire.make_rect(1, 1)
        squaroid = square.chamfer_2d(0.1, 0.1, square.vertices())
        self.assertAlmostEqual(
            squaroid.length, 4 * (1 - 2 * 0.1 + 0.1 * math.sqrt(2)), 5
        )
        verts = square.vertices()
        verts[0].wrapped = None
        three_corners = square.chamfer_2d(0.1, 0.1, verts)
        self.assertEqual(len(three_corners.edges()), 7)

        square.wrapped = None
        with self.assertRaises(ValueError):
            square.chamfer_2d(0.1, 0.1, square.vertices())

    def test_close(self):
        t = Polyline((0, 0), (1, 0), (0, 1), close=True)
        self.assertIs(t, t.close())

    def test_chamfer_2d_edge(self):
        square = Wire.make_rect(1, 1)
        edge = square.edges().sort_by(Axis.Y)[0]
        vertex = edge.vertices().sort_by(Axis.X)[0]
        square = square.chamfer_2d(
            distance=0.1, distance2=0.2, vertices=[vertex], edge=edge
        )
        self.assertAlmostEqual(square.edges().sort_by(Axis.Y)[0].length, 0.9)

    def test_make_convex_hull(self):
        # overlapping_edges = [
        #     Edge.make_circle(10, end_angle=60),
        #     Edge.make_circle(10, start_angle=30, end_angle=90),
        #     Edge.make_line((-10, 10), (10, -10)),
        # ]
        # with self.assertRaises(ValueError):
        #     Wire.make_convex_hull(overlapping_edges)

        adjoining_edges = [
            Edge.make_circle(10, end_angle=45),
            Edge.make_circle(10, start_angle=315, end_angle=360),
            Edge.make_line((-10, 10), (-10, -10)),
        ]
        hull_wire = Wire.make_convex_hull(adjoining_edges)
        self.assertAlmostEqual(Face(hull_wire).area, 319.9612, 4)

    def test_fix_degenerate_edges(self):
        e0 = Edge.make_line((0, 0), (1, 0))
        e1 = Edge.make_line((2, 0), (1, 0))

        w = Wire([e0, e1])
        w.wrapped = None
        with self.assertRaises(ValueError):
            w.fix_degenerate_edges(0.1)

    #     # Can't find a way to create one
    #     edge0 = Edge.make_line((0, 0, 0), (1, 0, 0))
    #     edge1 = Edge.make_line(edge0 @ 0, edge0 @ 0 + Vector(0, 1, 0))
    #     edge1a = edge1.trim(0, 1e-7)
    #     edge1b = edge1.trim(1e-7, 1.0)
    #     edge2 = Edge.make_line(edge1 @ 1, edge1 @ 1 + Vector(1, 1, 0))
    #     wire = Wire([edge0, edge1a, edge1b, edge2])
    #     fixed_wire = wire.fix_degenerate_edges(1e-6)
    #     self.assertEqual(len(fixed_wire.edges()), 2)

    def test_trim(self):
        e0 = Edge.make_line((0, 0), (1, 0))
        e1 = Edge.make_line((2, 0), (1, 0))
        e2 = Edge.make_line((2, 0), (3, 0))
        w1 = Wire([e0, e1, e2])
        t1 = w1.trim(0.2, 0.9).move(Location((0, 0.1, 0)))
        self.assertAlmostEqual(t1.length, 2.1, 5)

        e = Edge.make_three_point_arc((0, -20), (5, 0), (0, 20))
        # Three edges are created 0->0.5->0.75->1.0
        o = e.offset_2d(10, side=Side.RIGHT, closed=False)
        t2 = o.trim(0.1, 0.9)
        self.assertAlmostEqual(t2.length, o.length * 0.8, 5)

        t3 = o.trim(0.5, 1.0)
        self.assertAlmostEqual(t3.length, o.length * 0.5, 5)

        t4 = o.trim(0.5, 0.75)
        self.assertAlmostEqual(t4.length, o.length * 0.25, 5)

        w0 = Polyline((0, 0), (0, 1), (1, 1), (1, 0))
        w2 = w0.trim(0, (0.5, 1))
        self.assertAlmostEqual(w2 @ 1, (0.5, 1), 5)

        spline = Spline(
            (0, 0, 0),
            (0, 10, 0),
            tangents=((0, 0, 1), (0, 0, -1)),
            tangent_scalars=(2, 2),
        )
        half = spline.trim(0.5, 1)
        self.assertAlmostEqual(spline @ 0.5, half @ 0, 4)
        self.assertAlmostEqual(spline @ 1, half @ 1, 4)

        w = Rectangle(3, 1).wire()
        t5 = w.trim(0, 0.5)
        self.assertAlmostEqual(t5.length, 4, 5)
        t6 = w.trim(0.5, 1)
        self.assertAlmostEqual(t6.length, 4, 5)

        p = RegularPolygon(10, 20).wire()
        t7 = p.trim(0.1, 0.2)
        self.assertAlmostEqual(p.length * 0.1, t7.length, 5)

        c = Circle(10).wire()
        t8 = c.trim(0.4, 0.9)
        self.assertAlmostEqual(c.length * 0.5, t8.length, 5)

    def test_param_at_point(self):
        e = Edge.make_three_point_arc((0, -20), (5, 0), (0, 20))
        # Three edges are created 0->0.5->0.75->1.0
        o = e.offset_2d(10, side=Side.RIGHT, closed=False)

        e0 = Edge.make_line((0, 0), (1, 0))
        e1 = Edge.make_line((2, 0), (1, 0))
        e2 = Edge.make_line((2, 0), (3, 0))
        w1 = Wire([e0, e1, e2])
        for wire in [o, w1]:
            u_value = random.random()
            position = wire.position_at(u_value)
            self.assertAlmostEqual(wire.param_at_point(position), u_value, 4)

        with self.assertRaises(ValueError):
            o.param_at_point((-1, 1))

        with self.assertRaises(ValueError):
            w1.param_at_point((20, 20, 20))

        w1.wrapped = None
        with self.assertRaises(ValueError):
            w1.param_at_point((0, 0))

    def test_param_at_point_reversed_edges(self):
        with BuildLine(Plane.YZ) as wing_line:
            l1 = Line((0, 65), (80 / 2 + 1.526 * 4, 65))
            PolarLine(
                l1 @ 1, 20.371288916, direction=Vector(0, 1, 0).rotate(Axis.X, -75)
            )
            fillet(wing_line.vertices(), 7)

        w = wing_line.wire()
        params = [w.param_at_point(w @ (i / 20)) for i in range(21)]
        self.assertTrue(params == sorted(params))
        for i, param in enumerate(params):
            self.assertAlmostEqual(param, i / 20, 6)

    def test_tangent_at_reversed_edges(self):
        with BuildLine(Plane.YZ) as wing_line:
            l1 = Line((0, 65), (80 / 2 + 1.526 * 4, 65))
            PolarLine(
                l1 @ 1, 20.371288916, direction=Vector(0, 1, 0).rotate(Axis.X, -75)
            )
            fillet(wing_line.vertices(), 7)

        w = wing_line.wire()
        self.assertAlmostEqual(
            w.tangent_at(0), (0, -0.2588190451025, 0.9659258262891), 6
        )
        self.assertAlmostEqual(w.tangent_at(1), (0, -1, 0), 6)

    def test_order_edges(self):
        w1 = Wire(
            [
                Edge.make_line((0, 0), (1, 0)),
                Edge.make_line((1, 1), (1, 0)),
                Edge.make_line((0, 1), (1, 1)),
            ]
        )
        ordered_edges = w1.order_edges()
        self.assertAlmostEqual(ordered_edges[0] @ 0, (0, 0, 0), 5)
        self.assertAlmostEqual(ordered_edges[1] @ 0, (1, 0, 0), 5)
        self.assertAlmostEqual(ordered_edges[2] @ 0, (1, 1, 0), 5)

    def test_geom_adaptor(self):
        w = Polyline((0, 0), (1, 0), (1, 1))
        self.assertTrue(isinstance(w.geom_adaptor(), BRepAdaptor_CompCurve))
        w.wrapped = None
        with self.assertRaises(ValueError):
            w.geom_adaptor()

    def test_constructor(self):
        e0 = Edge.make_line((0, 0), (1, 0))
        e1 = Edge.make_line((1, 0), (1, 1))
        w0 = Wire.make_circle(1)
        w1 = Wire(e0)
        self.assertTrue(w1.is_valid)
        w2 = Wire([e0])
        self.assertAlmostEqual(w2.length, 1, 5)
        self.assertTrue(w2.is_valid)
        w3 = Wire([e0, e1])
        self.assertTrue(w3.is_valid)
        self.assertAlmostEqual(w3.length, 2, 5)
        w4 = Wire(w0.wrapped)
        self.assertTrue(w4.is_valid)
        w5 = Wire(obj=w0.wrapped)
        self.assertTrue(w5.is_valid)
        w6 = Wire(obj=w0.wrapped, label="w6", color=Color("red"))
        self.assertTrue(w6.is_valid)
        self.assertEqual(w6.label, "w6")
        np.testing.assert_allclose(tuple(w6.color), (1.0, 0.0, 0.0, 1.0), 1e-5)
        w7 = Wire(w6)
        self.assertTrue(w7.is_valid)
        c0 = Polyline((0, 0), (1, 0), (1, 1))
        w8 = Wire(c0)
        self.assertTrue(w8.is_valid)
        w9 = Wire(Curve([e0, e1]))
        self.assertTrue(w9.is_valid)
        with self.assertRaises(ValueError):
            Wire(bob="fred")


class TestWireToBSpline(unittest.TestCase):
    def setUp(self):
        # A simple rectilinear, multi-segment wire:
        # p0 ── p1
        #       │
        #       p2 ── p3
        self.p0 = Vector(0, 0, 0)
        self.p1 = Vector(20, 0, 0)
        self.p2 = Vector(20, 10, 0)
        self.p3 = Vector(35, 10, 0)

        e01 = Edge.make_line(self.p0, self.p1)
        e12 = Edge.make_line(self.p1, self.p2)
        e23 = Edge.make_line(self.p2, self.p3)

        self.wire = Wire([e01, e12, e23])

    def test_to_bspline_basic_properties(self):
        bs = self.wire._to_bspline()

        # 1) Type/geom check
        self.assertIsInstance(bs, Edge)
        self.assertEqual(bs.geom_type, GeomType.BSPLINE)

        # 2) Endpoint preservation
        self.assertLess((Vector(bs.vertices()[0]) - self.p0).length, TOLERANCE)
        self.assertLess((Vector(bs.vertices()[-1]) - self.p3).length, TOLERANCE)

        # 3) Length preservation (within numerical tolerance)
        self.assertAlmostEqual(bs.length, self.wire.length, delta=1e-6)

        # 4) Topology collapse: single edge has only 2 vertices (start/end)
        self.assertEqual(len(bs.vertices()), 2)

        # 5) The composite BSpline should pass through former junctions
        for junction in (self.p1, self.p2):
            self.assertLess(bs.distance_to(junction), 1e-6)

        # 6) Normalized parameter increases along former junctions
        u_p1 = bs.param_at_point(self.p1)
        u_p2 = bs.param_at_point(self.p2)
        self.assertGreater(u_p1, 0.0)
        self.assertLess(u_p2, 1.0)
        self.assertLess(u_p1, u_p2)

        # 7) Re-evaluating at those parameters should be close to the junctions
        self.assertLess((bs.position_at(u_p1) - self.p1).length, 1e-6)
        self.assertLess((bs.position_at(u_p2) - self.p2).length, 1e-6)

        w = self.wire
        w.wrapped = None
        with self.assertRaises(ValueError):
            w._to_bspline()

    def test_to_bspline_orientation(self):
        # Ensure the BSpline follows the wire's topological order
        bs = self.wire._to_bspline()

        # Start ~ p0, end ~ p3
        self.assertLess((bs.position_at(0.0) - self.p0).length, 1e-6)
        self.assertLess((bs.position_at(1.0) - self.p3).length, 1e-6)

        # Parameters at interior points should sit between 0 and 1
        u0 = bs.param_at_point(self.p1)
        u1 = bs.param_at_point(self.p2)
        self.assertTrue(0.0 < u0 < 1.0)
        self.assertTrue(0.0 < u1 < 1.0)


if __name__ == "__main__":
    unittest.main()